Ford Powerstroke Diesel Forum banner

wheel

  1. Wheels, Tires, and Brakes
    I picked up some SD factory take off rims off a 2019. I tried mounting them on my 2006. Everything fit well except for I was only getting 14mm (.55") of wheel stud sticking through the rim. Iam thinking the stud length must be longer on the 2017+ SD's? can anyone confirm.
  2. 6.4L Performance Parts Discussion
    I can't find any recent update concerning the compressor turbo wheel upgrades on the stock turbos. Wicked Wheel 2 & Batmowheel come to mind. Are they an improvement? Are they wasted money? I've been struggling with high EGTs, and would like to hear from another 6.4 owner/driver if any wheel has...
  3. General 6.7 Discussion (2011-2016)
    I just purchased a 2013 F350 6.7 SRW Crew Short Bed 4x4. I am installing a Carli Backcountry 4.5" Lift with full progressive rear springs. Carli is recommending a 17"-18" Wheel, no more than 9" wide with 5" of Backspacing for this suspension. For the tire, I am going with the Toyo Open Country...
  4. General Diesel Discussion
    I was wondering about how much a front wheel bearing would cost. It's a 97' f250 7.3l.
  5. 99-03 7.3L Performance Parts
    I bought a riffraff wheel from dyno proven (riffraff was out of stock) and it shows the marking bdpaf7.3 on the back and on the stud on the front of it. Did they send me bdp's wheel by mistake? Thanks!
  6. 94-98 7.3L General Powerstroke Discussion
    I just took a turbo from a 97 e350 and a 95 f350. Opposite of what everyone has been saying, they are the same. Same a/r on compressor and exhaust side, same looking wheels, neither wastegated, shapes, angles,etc. I thought they were different? Thanks for any feedback.
  7. 99-03 7.3L Performance Parts
    I was just on FTE diesels website and saw a Batmo wheel for a 7.3, never saw one before. Are they any good? Better than a WW2? Thanks!
  8. Suspension Parts
    4 20" Weld Racing one piece aluminum rims. 2 of the rims have 38" by 15.5" Mickey Thompson Baja MTZ's and the other 2 rims have no tires on them. Rims are in good shape. I am just getting rid of them because they are not my style. Great rims. No longer in production. Beadlock ready. 2000 OBO...
  9. 6.4 Drivetrain Problems
    As the title says. I put it in 4x4, and it won't engage. For a while it would slam into 4x4, and it'd have a grinding sound, then it'd work. But now I put it in 4x4, and as I try to move, I can hear something grind from the front of the truck. Does that sound like bad hubs? Are they hard to...
  10. 99-03 7.3L Performance Parts
    Does anyone have an early 99 compressor wheel in their truck? Im selling an early 99 turbo, and I was considering swapping the wheel with my 01, and put the 01 wheel in the early 99 turbo. Will this work and is it worth the time?
  11. 99-03 7.3L Performance Parts
    I have an early 99 f250 7.3 I was told that it has a different turbo and injectors than a year newer is this true? if so can I put a compressor wheel for the newer model in my turbo or do I have to get a whole new turbo? also will I be ok putting a chip in it with the different injectors and such?
  12. 99-03 7.3L Performance Parts
    I just got done installing a new turbo wheel from Riff Raff diesel. When i finished i took the truck for a ride in my 120hp setting and when the turbo spools at high boost it makes a wining sound. Its not the turbo whistle. Could this be a boost leak? Or what? Any help would be much appreciated...
  13. 99-03 7.3L Performance Parts
    I have a 1999 7.3 with a build date of 3-22-1999. I was wondering what would be the best turbo wheel upgrade for my stock turbo? I'm looking for performance and some extra whistle :nod:. I've heard of the batmowheel and WW2, does anybody have suggestions?
  14. 6.4 Drivetrain Problems
    Sorry am sure this is in the wrong forum, but I am new to this, and I think something is up with my hubs. Its not making any noise or anything like that but I was washing my truck today and noticed that my drivers side locking hub is sticking out about a quarter inch from the inside of the...
  15. Suspension Parts
    For sale: 2004 Excursion 6.0L axles, springs, 16" factory alloy wheels and good condition AT tires. Pulled out for a coil conversion. Good condition with around 200,000 miles. $2000 for everything. Email Robert at [email protected] for more details. Local pick-up only in New Orleans area.
  16. Wheels, Tires, and Brakes
    I need to get a good set of tires and wheels. im putting on a 6" fabtech 4link lift on my 2013 f250 6.7. i was wondering if anyone had any suggestion on wheels and tires. ive been looking at bmf wheels are these good wheels?
  17. Suspension Parts
    I have a wheel off of a 2008 f250. Make an offer. Tag from ford says 185 17x7-1/2 (srw, pressure sensor)
  18. Exterior Parts
    I need 05-07 king ranch 20 i need one but if you need to sell as set its fine
  19. Wheels, Tires, and Brakes
    I've been getting a weird squeaking noise from my front right tire for the last week or so and i thought it was the wheel bearing going bad so i jacked the truck up so i could shake the tire to check the wheel bearing and the tire was extremely extremely loose, the lug nuts had not been...
  20. Drivetrain 911
    Just got the tires rotated and balance but they weren't able to remove one of the rear lug nuts so i told them to just break the stud... it didn't break. and now the stud is just spinning with the lug nut on it, so i can't remove the wheel at all... How do i break it or get it off?? I don't...
Top