First off, maybe I’m completely wrong but I wanted to share my experience. I got a new work truck and its main job is pulling around a cat 289d on a gooseneck. Truck is a 2006 f350 crew cab long bed. Freshly rebuilt motor (~6k miles) fully deleted. Runs pretty good as is but wanted to try out...

Hi everyone, My name is Eric, formally with Quick Tricks. Now with Kloud9Nine(K99) Tuning. I’m offering the Looney tune for 6.0L’s through HP Tuners, specifically the RTD. If you’re interested, email me at [email protected] Have a great day!

2011 6.7 mdc diesel’s turbo kit coming in & I can’t find NON-VGT tunes for the life of me. MINIMAXX tuner and deleted. Can find regular “emissions” equipt tunes but that’s it.. some one help, new to the forum!

Hi Everyone, After 3 months of stalking the forums I have finally decided to post about my issue in hopes of finding a resolution. 3 months ago I tuned my 2019 f250. Immediately I noticed on the freeway that the turbo would spool to 5 psi at 0% throttle. I have reached out to the tuner and...

Hello everyone, it’s been about 6 months now since I’ve had my truck running again thanks to all of you. I have a few questions, first of all, let’s talk about studding a 6.0L. I’ve been very busy with school and work and find I do not have a lot of free time lately. I’ve been wanting to stud my...

Hey guys, I’ve got a 2005 6.0 with 215k that I bought a couple months ago. The previous owner was a woman that used it to tow her light weight camper a couple of times a year. The truck is studded, deleted, and has a coolant filtration system, I also think that the blue spring mod has been done...

Recently had O Ring heads, heavy duty Bulletproof oil cooler, Bulletproof water pump, Powermaxx turbo, O Dawg intake, EGR delete, degas bottle, regulated fuel return, remote oil filter, coolant filter, 4" exhaust, ARP head studs, aluminum intake elbow pipe, S&B cold air intake, lifters...

So i just got my 6.4 back after extensive bulletproofing, new turbo, new engine and a bunch of other upgrades. I got the dpf-r plus and am seeing quite a bit of black smoke. My mechanic ran it on the economy tune and put it back to stock because there was so much black smoke on the economy tune...

I have a 1999.5 F250 4X4 automatic. It runs great but I wanted to put a TS 6 position chip in it. The previous owner flashed it with a Hypertec programmer. I don't know which tune. I was told I needed to flash the PCM back to stock before I installed the chip. I took it to the Stealership and...

I just got off the phone with Walle at FTE diesel and he said he sells David Lock custom tuning on a 6 position platform. I cant find any info on it, anyone have any experience with it? Thanks!

Just curious who has the SCT Advantage III software to write their own tunes? I purchased mine a little over a year ago to tune my Lightning and I just sent off the paperwork to SCT to add my F250 to my contract It would be great to have a Tuning Forum/Section to exchange tuning tips/info etc.

My buddy has a bully dog tuner with the display that has gauges. He knows they are junk, so he got the sct sf3. His question is, can he plug in the sct, dowload his tune, then plug in his bully dog for his gauges? Thanks!

I have a 2008 6.4 that is stock at the moment except for an afe cai. The truck started running sh*tty has no power at all unless I ease into the trottle, and threw a code, read it and p1335 came up, sounds like the egr valve is full of soot? If so can I put a dpf delete kit with a tuner and just...

Im stuck between Gearhead and no limit tuning tuning for my 7.3, i need to get my TS 6 position reburned. I have stage 2 injectors, a fuel system, ect. Gearheads offers lifetime re-burns and a 30 day money back guarantee, and the initial cost for just the tunes is cheaper than no limit. No...

So winter is coming and I live in a cold area so my high idle is important to me. The story of how this happened: I bought the truck in September 2012 used with the high idle already installed with a knob to adjust rpm. My high idle worked every time I flipped the 4th aux. switch right up until...

i got my ts burned through ktperformance with custom php tunes for my 160/80 stage 2's, i currently have a stock turbo and the first 2 tunes are for my current setup, the last 4 are for a gtp38r(whenever i get one). Fedex lost my package on the way back after 3 weeks of waiting already, then it...

I purchased and have installed a SCT SF3 tuner and would like to further understand how it's operating. I've tried to look through the wealth of information on this forum and it has only added questions thus far (maybe I've not found the correct post). I am still confused as to what I should...

hey guys im thinking about getting an SCT SF3 power flash ford programmer, ive never "chipped" a vehicle before and i want to start getting into tunning my truck up, im not sure if getting that chip would be optimal for my truck, i have an 06 f250 6.0, i saw a package i could get that has...

Hey Guys! I just picked up a '99 F-250, with only 170 miles on a 7.3L diesel, regular cab, eight foot box. I've done a K&N cold air intake on it already. What else can I do to get more horsepower and torque? -Magnaflow exhaust? -Ramping, stacking the CPU? -I wanna keep the stock injectors...