Ford Powerstroke Diesel Forum banner
tie rod
1-4 of 4 Results
  1. Suspension & Steering
    I put on new Moog tie rods and drag link probably a month ago. I noticed how poorly designed the way the dust boots secured to the lip that’s supposed to hold them. I put it all on and filled with grease until the boot started to swell. The first week or so I had to clean off over flow from...
  2. General 6.0L Discussion
    So most of the big threads, write-ups and videos on the Superduty Ball Joints seem to be 1999 - 2004 model year specific. Since front axle was upgraded to a Dana Super 60 in 2005 there are going to be different parts lists for the 2 year ranges. Aftermarket Ball Joints are the...
  3. General 6.0L Discussion
    Hey guys, short and sweet...here is the problem. Usually when taking a left hand turn at about 10-15 mph (curve), if feel and hear a clunk noise coming from the passenger side front end. I did some research and most people say that the sway bar bushings and end links are a common problem for...
  4. 6.0 Drivetrain problems
    Well....I noticed a popping/thud sound under my floor board at low speeds.:ohnoes: Got under the truck and I can easily move both tie rods up and down (making the same thud sound while driving). So I've got the new ones (MOOG) and plan on replacing tomorrow morning (when it's not 100+...
1-4 of 4 Results
Top