temp

A couple months ago my truck started to overheat randomly so I stopped driving it. Today was my first time driving it since and I pulled over a couple times and I noticed it only starts to overheat coming out of idle. I also noticed that around the same time when I had the overheating problems...

I have a 2002 7.3 with a Mishimoto aluminum radiator, Dieselsite water pump, billet thermostat housing and190 thermostat, XDP coolant filter, Adrenaline HPOP, Alliant IPR valve and oil cooler. All new. Yesterday I was driving with no load. 100 degree ambient temperature outside. My oil temp...

I just got my '06 6.0 in January. Drove it all spring with no problem, and from Dallas to California with no problems. However, in the past two months the temp. has been going bat-s**t crazy and I have NO idea whats up. What's on the truck: Sinister coolant filter installed (with clean filter)...

Hey all, lurking for years, seldom post, but gained TONS of knowledge, so thanks to you all! 2005 QC 250 Lariat, 218K miles strong. 100 degrees today, and the AC starts blowing out the defrost. Not my first rodeo with vac leaks, so I swap the pump, no change, I swap the solenoid, no change, I...

Hey guys posting some temps think my oil cooler is pretty much screwed but want some quick opinions before i take the plunge Ambient temp: 45deg f ECT 184 // EOT 205 @ WOT ECT 184 // EOT 201 65 mph cruising after WOT run I know the ECT is a little low but that shouldn't affect the delta...

Ok so I know there is tons of posts about temp deltas. However, I am concerned about deltas when heavily loaded. During this time of year I routinely am driving on the highway in my truck at about 60mph with about 1000lbs of sand in the bed and a 9' plow on the front. This makes for a very...

I have found a list of reading like trans temp, coolant, fuel press, egt, boost, and oil temp. But I am looking for all the other stuff that you can monitor with SCII like VGT duty cycle, ICP pressure, etc...... I have been digging threads for each reading, I would just like a Master list of...

Hi, I was looking for ways to reduce my EGT's. I tow a lot and have a overdrive. I saw some mod called the genedad2 and it looked silly but had a good concept. The tool tray behind the grill has a flap that keeps all the air going through the A/C condenser. I cut that flap off and took towing...

So, i cant seem to get my truck to cool down under 340-330 deg. no matter how mutch I let it idle.. I was thinking it used to go below 300 before i would shut down. Is there an issue or is it ok to shutdown at 340deg. ?