Ford Powerstroke Diesel Forum banner

stock

  1. Stock vs Oversize tires?

    Wheels, Tires, and Brakes
    I bought my 2005 f250 6.0 used with Nitto terra grapplers already installed. Their size is a 295 70/17. I like them but I do a lot of highway driving now with just a bit of driving on dirt roads. What would be the benefit of going to a smaller tire, something closer to the stock size? I would...
  2. Chipped turbine!!! Best bolt on replacement!?!?

    99-03 7.3L General Discussion
    Chipped compressor wheel!!! Best bolt on replacement!?!? So just bought a '00 7.3 and checked the turbo and she's got chips on the intake blades.... :crying: thinking of upgrading the turbo if i'm paying the money to replace it anyway. Thing is she's all stock so i'm not sure if it would be...
  3. tuned or not ?

    6.0L Performance Parts Discussion
    this is more for you tuned guys that are familiar with stock vs tuned, and know differences in vital values.. ok this might be a little long but you need the whole story as to reason for this post. I bought my 07' F350 CCLB dually 4x4. just rolled 100K on it. all I have done to it is a 4"...
  4. strange high idle

    99-03 7.3L Powerstroke Problems
    My late 99 F250 has been acting strange lately. It has been idling around 900 rpm even though outside temps have been around 80 to 90 out. When i go out in the morning to start it, it runs fine no strange issues. Once driving for a bit when i come up to a stop my rpms will drop to 900 or so, but...
  5. • 2008 F250 6.4 stock components post build sale •

    Parting Out
    After my recent build I have all the original stuff for sale taken off truck at 30k. Hit me with offers and questions include your email if you pm me I am located in CT. Pictures are linked here in my gallery: Pictured Factory intake and filter ~3k Banks ram air intake and filter $150 Factory...
  6. TS 6 position stick chip question

    99-03 7.3L Performance Parts
    I have a 2000 f350. 6637 air filter, 4" turbo back exhaust, trans cooler and thTs about it for mods. I've had the turbo pipes exhaust manifolds and both cylinder heads replaced. Anyways I have my 6 position chip. I'm itching to put it in at least to just try it for a bit. But I have a concern. I...
  7. Need info about stock exhaust for '97

    94-98 7.3L Exterior Discussion
    Hey Guys, I have a '97 with 330,000 miles and I just got her a couple months ago. My friends and I were looking her over and someone noticed the exhaust looks way too small. The exhaust has been replaced at some point from where the cab and bed meet, back with just a basic piping and a muffler...
  8. 6.0 stock air intake

    General 6.0L Discussion
    Does anyone happen to have a stock air intake laying around they'd like to sell? When we bought the truck it came with an aftermarket air intake from what looks to be autozone or something. Would like to return it to stock as that seems to be a better way to go that what's there now. As it...
  9. SCT tunes for stock truck

    6.0L Performance Parts Discussion
    Looking for more horsepower but still longevity and reliability of the truck. Yes I already know that any added horsepower over stock is decreasing my chances of longevity and reliability and is increasing my chances of "when" something will go wrong. Truck is an 06' f250 FX4, 6 inch BDS lift...
  10. 20 inch Wheels

    Suspension Parts
    I have 3 stock 20 inch polished aluminum rims for sale. They have some minor scratches and use. Come with ford stock axle covers, I have four tires that could go with them for additional price. Pick up locally only. $200.00 w/out tires $300.00 with tires :ford: Whatcom County Washington State
  11. Do you think this would look good?

    General 6.7 Discussion (2011-2016)
    I own a f250 cc lariat I would like to keep my stock 20" wheels and put a 2.5 carli level/lift on it and go with 35 toyo's. I believe 37's would rub. Every time I see pictures of a 4.5" lift I start to want it but i'd like to stick with stock rims. if you have any pictures that would be...
  12. SCT 9625OR Tunes

    6.4L Performance Parts Discussion
    I have just bought an SCT 9625OR for my '08 F350 P6.4L after what seemed like ages of searching, and I'm eager to try it. I have ordered the components for DPF/CAT & EGR deletes, just waiting on them to come in. Also purchasing an AFE Stage II R5 intake. Once i get all the parts in to do the...
  13. Stock OBS Ride height

    94-98 7.3L General Powerstroke Discussion
    I have a 96 F350 I bought about 8 months back and Im curious what the current amount of lift it has so if anybody has a stock 96 350 that they could give me the measurment from the middle of the hub to the bottom of the fender would be awesome.
  14. Saving stock tranny

    6.0L Problems Forum
    Any good advice on how to take care of a stock tranny on a 6.0? Thanks in advance.
  15. WTB Stock Tail Lights for a 2007

    Exterior Parts
    I'm looking for a stock set of tail lights that will fit my '07 F350. I know that a lot of guys upgrade these and may have a set sitting around the garage. I'm not looking to spend a ton for these but let me know what you have and how much you want for them. I want them to be in stock...
  16. White Smoke, stock truck, first regen

    6.4L Problems Forum
    2010 just rolled 36K miles 100% stock truck. I have put 4K miles on the truck in about 2 months this past weekend did about 950 miles in about 3 days. I have noticed a random puff of white smoke (and notice an exhaust smell with windows down) a few times over the past 2 months, but had about...
  17. XD HOSS for Stock 08 20s

    Suspension Parts
    Willing to make a deal on my 18" xd hoss for 08-10 stock rim. Delivery or meet only no shipping In DFW area 817996662five
  18. 1973-79 Core Support

    Exterior Parts
    I have a core support for 73-79 f150,250, 350, or bronco . It is new old stock, doesnt even have surface rust on it. NOT USED! Asking $300
  19. searching for parts

    General 6.0L Discussion
    Im new to the forum and Im looking for a stock late 04 turbo with a 10 fin turbine if any one has one i would like to buy it ... thanks for the help
  20. WTB 1995-1999 Stock Alcoa Wheels 4x4

    Exterior Parts
    Just bought a 1997 F-350 crew cab long bed, I love the truck I just hate the 85 looking steel wheels with covers.. I want the alcoas (im a semi driver and I love the Alcoa Look) looking to buy and or trade for them... tires included would be a plus but not req. let me know what you got/want...
Top