Ford Powerstroke Diesel Forum banner

rims

  1. General 6.4L Discussion
    Does anyone know the weight of the OEM 20" rims with tires? I weighed my Helos 20" with 285's (34.8" tall) on them this weekend and they came in at 96.7 lbs with about 5-6/32nds tread left. If you have another wheel combo that you have weighed, feel free to list it. A lot can be learned from...
  2. 6.0L Performance Parts Discussion
    Its about time for new tires again. I cant find 38" or bigger tires for my 20" rims for less than $400/tire. Was thinking about just getting 22.5" alcoa rims and running tractor trailor tires cause theyre so cheap. Problem is my 350 is SRW. Anyone know if they make 22.5" rims in 8 lug for SRW...
  3. Exterior Parts
    Took these 24" rims of my 2006 F-350. they look great, only a few scratches and pitting from normal wear and tear. I only drove about 5,000 miles on them. The tires are bald and need replaced. They are an 8 lug pattern which should fit f250/350/excursion from '99 to '08. Im asking $650 and am...
  4. Suspension Parts
    has a set of decent nitto terra grapplers on them, the wheels has some grime on them that can be gotten off with acid or just polish 3 tires 50% rubber left 1 tires 30% rubber and has very slow leak probably just needs patching or plug tires are 315/70/r16 if im not mistaken. and the tires...
  5. Suspension Parts
    i have a set of stock 7.3 rims for sale that i have polished. i polish all kinds of aluminum for a living as work comes along so they are professonal polished. i want 400 for the set of 4. text for pictures 815 291 7911. you pay shipping!
  6. 6.0L Exterior Discussion
    I'm going to look at a set of Moto Metals rims tomorrow. The seller described them as being 16" in diameter and that was all. I am currently running the stock 2003 Super Duty rims on Toyo M55s (285/75R16). I am concerned as to if the Moto wheels will be compatible. I have reason to believe that...
  7. 6.7 Exterior Discussion (2011-2016)
    I'm looking to get a set of rims and tires now, and then putting 4.5" lift on when I can afford it. My question is what is the maximum width and offset that would fit on a stock CC FX4. The width I'm looking at is 11" wide with -24 offset. Thanks in advance.
  8. 6.0L Exterior Discussion
    I did not like my stock chrome rims and could not afford new ones at the time, so I decided to paint them... That's when i discovered Plasti Dip, the best paint product in the world! I'm sure ya'll have heard of it, but if you haven't... it is a rubbery spray paint that is very durable and chip...
  9. Wheels, Tires, and Brakes
    Would greatly appreciate it if someone could shed some light on how I determine the correct wheels for my e350 bus. Background: It's titled as a 95', though it was actually made in 94 (7.3 IDI). Originally used by a transportation company to shuttle seniors around, it was take out of service...
  10. Exterior Parts
    im selling a set of obs factory alcoa rims i only have the front center caps 4x4 $200 cash buys the set plus shipping u can text if interested all are in decent shape but to be perfect clear should be stripped and then they would need polished text 217-917-0118 if interested for fast reply
  11. Suspension Parts
    I have a set of factory 18's with tires. Tires are Nitto Terra Grapplers in 295/70/18. Two tires are about 50% and two have uneven wear. I have the center caps and 24 lug nuts. Wheels are in good shape. They are still mounted, but I will separate. I am flexible on the price, but would like...
  12. Wheels, Tires, and Brakes
    First off, the amount of knowledge that I have obtained of this site is ridiculous. So a sincere THANK YOU to all the members of this site who offer there expertise on these vehicles. If I can ever be of help I know fords very well especially the late 90's F450 bucket truck platform. Moving...
  13. Suspension Parts
    Weld Cheyenne Evo. Forged aluminum. Chrome. 17"x10". 8 lug. Pattern 8x170mm. This design, Cheyenne EVO, is the best looking wheel that Weld ever made.(in my opinion). These wheels are as close to new condition as I believe can be found. The chrome is perfect and there are no scratches. These...
  14. 94-98 7.3L Exterior Discussion
    i know this is supose to be in the for sale section but honestly theres nothing for any older trucks there so i have a set of factory alcoa wheels im selling its just hte wheels i have the front center caps but thats is the rears broke there in good condition not perfrect but good ill take $350...
  15. General 6.0L Discussion
    Hey guys, Im sure this subject has come up multiple times, but I'm gonna be a pest and bring it up again. So here we go with a few questions.... 1. Can a 35" x 12.50" tire fit on a stock height 05 FX4 Powerstroke with the right rim offset? (Little to no mod/mockup) 2. What offset is needed for...
  16. Suspension Parts
    I'm selling my factory F250 rims. They are polished alloy 16x7 OEM wheels with center caps, lugnuts, and tires. Tires are 265/75-16 BFGoodrich Rugged Terrain T/A. Tires still have a good amount of thread. Only reason for selling them is that I got new wheels and tires and have no where to store...
  17. Trucks
    looking for some help just got a 2008 f450 kingranch and looking for some wheels 24.5 or 24
  18. Suspension Parts
    these have about 5k miles on them. no curb rash, no chrome pitting etc. they are diesel approved and rated at 3800lbs. extremely strong wheels. i paid $400 new for them and selling for $1200 obo. they're boxed and ready to pick up or i can ship at buyers expense. on the truck...
  19. Wheels, Tires, and Brakes
    wondering if the kmc hoss are durbale for jumping offroading aggressive driving etc on a f25o diesel?? thanks:icon_ford:
  20. Suspension Parts
    Ford 8 lug 15X16.5 wheels
Top