Ford Powerstroke Diesel Forum banner

p0299

  1. Turbo leaking at clamp

    Articles - Engine, Other
    Hello all, Recently removed my turbo to clean vanes and unison ring from P0299 pow boost. Truck would start with no turbo spool until reaching a certain RPM or would eventually after leaving at idle for a bit... VGT would stick at 85% until then. I assume the heat (and maybe oil pressure?)...
  2. P0299 nightmare

    6.0L Problems Forum
    Hi gentlemen, I have a '05 6.0 with 143 on the clock. Bought the truck with the p0299 assuming it was potentially the turbo. The truck initially would turbo bark and backfire through the intake WOT @2200 give or take. The truck would hold shifts and hesitate all while making normal boost...
  3. P0299 - New VGT, Cleaned Turbo, Unison Good

    6.0L Problems Forum
    Hi everyone I am new to the forum. My Problem is a P0299 CEL, the only symptom is P0299 CEL I get a good boost (WOT Uphill 22-24psi) EBP read 14.8 at idle Baro reads 14.5 at idle My Truck: 2005 Powerstroke 6.0 L F-350 XLT - Super Duty - Supercab ~160K miles Recent repairs: Water pump...
  4. P0299, P1400, P2263, Blue Smoke and Powerloss

    6.0 Motor problems
    I want to apologize ahead of time because I am going to try to give as much info as possible so if this gets lengthy I will try to makes this easy to read. The Truck; 2005 Ford F350, 4x4 DRW, 6.0, 162.435 miles APR Heads 2016 Oil Cooler replaced with OEM 2016 EGR Delete with puck 2015...
  5. 04 F350 several codes. low power.

    6.0L Problems Forum
    OK, here goes. I have a 2004 F-350 crew cab dually King Ranch with a 6.0 Diesel engine manufactured in November of 2003. I have been having power issues for a while. Here is what is happening: 1. Cranks great but then has very little power on take-off and while driving. Hot, cold engine or...
  6. My P0299 and P0470 journey

    6.0 Motor problems
    Gents, This forum has been huge for getting my truck up-to-speed over the last few months. So, I thought I'd give back and maybe help someone else out who runs into similar issues. I bought my truck in Sept '16 from a Diesel shop owner. Nice stock truck with only 57K miles on it from hauling...
  7. P0299 CEL, Can't figure it out

    6.0 Motor problems
    Hello Everyone ... My first post, about my first PSD, not my first problem and probably wont be my last. My truck: Stock 2007 F250 6.0 XL FX4 w/ 6SPD Man, 30k mi. on new turbo, oil cooler, EGR cooler My truck's warranty is expiring in about 2500 miles and I wanted to start installing...
  8. first time p0299

    Testing Forum
    hi guys this is my first time posting here but I have a 2005 F350 lariat 4x4 W/6.0 and ive got a problem of course. I have an after market turbo boost guage that goes to 35 psi however im getting p0299 but on average it will boost to 30 before it shifts. checked it in auto enginuity and turbo...
  9. P0299 CEL and rough cold start

    Diesel Diagnostics
    It's about that time again for issues to come up at the same time you have other projects going on. I've got an '06 F250 6.0 AT First issue - Since last fall, the truck runs rough on cold start as in the first start of the day, doesn't matter too much what ambient temp is, but obviously takes...
  10. New to powerstroke and have some issues...

    6.0L Problems Forum
    Just bought a 2006 King Ranch with 71,000 miles. the truck has a K&N air filter system and a Edge Programmer. There are 3 issues I have with this truck and before I take it to mech i wanted to see if someone in here could ease my mind. Issue #1: My check engine light is on and the code is...
  11. Confusing Code Reader info/Water in Fuel

    General 6.0L Discussion
    My stock 2005 F250 6.0 with 55,000 miles has had a P0299 error code (Low Turbo/Supercharger Boost) for several months. I reset it and eventually it comes back on, usually after I lug the engine on a hill or with head wind. I started smelling coolant on hills and eventually saw white smoke in...
Top