Ford Powerstroke Diesel Forum banner
oil temp
1-6 of 6 Results
  1. 6.0L Problems Forum
    So I just did my 2nd oil cooler backflush, and also replaced the thermostat and reservoir/degas bottle. There was a bunch of crud stuck up top in the reservoir and as the antifreeze expanded it would rise into the crud and run it through the system šŸ˜¬. Anyway, flushed it out, replaced the coolant...
  2. General 6.0L Discussion
    Hey everyone, just wanted to share this with anyone who might want to know. Lately I've been having large deltas in EOT and ECT, as well as a hard start when hot. Recently d it an oil change and switched to mobil 1 5w40 delvac and I'm quite surprised. Oil temps dropped significantly from almost...
  3. Diesel Diagnostics
    So I had a buddy let me use his scanner one day and drove up a big hill. My coolant never went above 210 but my oil temp was super high, it said 245. We replaced the oil cooler and all the seals on the top of the motor. We went for another drive when we had everything back together and the...
  4. General 6.0L Discussion
    Hey everyone! first of all happy fathers day to all you dads out there! So anyways my 06 6.0 needs an oil cooler for sure. 200 ECT and ive seen up to 233 EOT. not good at all. im actually still scared it those numbers did some damage though it was only for maybe 5 minutes.. i really wanted...
  5. 6.0L Performance Parts Discussion
    Ok so I'm looking at getting the edge cts and sct sf3 combo from mkm customs I want to know if it comes with everything needed to monitor ect and eot I know the egt probe is seperate. Also what would I need for the sct livewire it comes with the egt probe?
  6. 6.0 Motor problems
    I have searched high and low for some info on this issue. I have a 2006 6.0 that the wrench light comes on after about 30 miles. I borrowed a code scanner that reads live data and the oil temp was 255. I used my infrared heat gun to confirm that the oil was actually right with coolant temp...
1-6 of 6 Results
Top