Ford Powerstroke Diesel Forum banner
oil pressure
1-15 of 15 Results
  1. 99-03 7.3 Motor Problems
    '02 7.3. I had the oil pan replaced a few years ago, and I've had issues, when the temp is below 40f. The HPOP is usually empty.. Once she starts, and temp comes up to normal range, she's good,for the day. Starting is a royal pain. She cranks, and starts, but oil pressure gauge shows no...
  2. 94-98 7.3L General Powerstroke Discussion
    Good morning all! I am in the process of checking my oil pressure on my 95 7.3. Plugging my gauge into one of the ports by the valve covers, I'm getting about 6-650 psi at idle and when I floor it, it goes up to 2,500 psi for a few seconds and then drops to 1,500 psi. Is this normal? Thanks!
  3. 6.7 Motor Problems (2011-2016)
    2011 6.7 I did the sinister EGR delete and DPF delete. Tuned it with a Mini max and now truck is screaming low oil pressure. I can't even find the damn sensor. Any tips??????
  4. General 6.0L Discussion
    Alright guys, think i got it narrowed down however before the customer is called and told that he needs 8 injectors I wanted some opinions... Customer first came in with an extended crank when hot and also smoke coming from tail pipe. High pressure oil rail nipple o rings, stand pipes, dummy...
  5. Diesel Diagnostics
    Hi my name is bob I have a 2004 6.0 diesel Excursion I have an intermittent problem with oil gage goes to 0 and check gage light comes on at an idle. Truck runs smooth with no smoke no oil leakage idle or speed. Over 800 rpm all is good. Fresh oil and filter about 500 miles. This happens every...
  6. 6.0 Motor problems
    Hello all, I am new to the forum and was hoping I might be able to get some advice. Ive been around these 6.0's since they have come out and have yet to see what this one is doing. Here goes. Got it as a No start. Wiring isssues, no stalk in the oil/fuel filter housing unable to build pressure...
  7. 6.0 Motor problems
    Hi guys i am new to the thread. so this weekend i tackled the semi-bullet proof kit and i checked everything over but when i turn the key, i dont get S^!t for oil pressure. i do not have a scan guage or anything. that was soon to be ordered. the truck did start no problem before i did the work...
  8. 6.0 Motor problems
    Hello everyone. I have a 2003 F350 DRW 6.0. The motor has had apr studs, egr delete, 4" straight, Oil cooler upgrade, FICM reprogrammed, and a few other minor tweaks. Today while I was heading to the airport my truck started slowly loosing power and stalling out. I pulled off to the side of the...
  9. 6.0L Performance Parts Discussion
    I have GlowShift gauges on the way for boost, fuel pressure, and oil pressure. Wondering how difficult it is to hook these gauges up? Any secrets?
  10. 6.0 Motor problems
    Truck shut off on me, no oil pressure on cranking. We changed the pump, still no go, we also changed the oil pressure sensor, regulator & a misfiring injector...... Still takes forever to build up pressure on cranking, my awesome mechanic is now stumped. Anybody have any other suggestions so we...
  11. 99-03 7.3 Motor Problems
    I have a 2000 powerstroke with 373k on the clock. After warmup the oil pressure, at idle, will drop out to zero. The minute you touch the pedal the pressure shoots up like normal. Can't see how my it could be a sensor or gauge prob as it works fine all other times except idle. Anyone ever...
  12. 6.0L Problems Forum
    Have 2006 Ford Power stroke with 6.0 in it.. Just started doing this ... When Im driving the oil pressure gauge is fine and motor sound fine, but sometime when I come to a stop sign the oil gauge will drop all the way down to zero, the motor still runs fine and has plenty of oil in it. After I...
  13. 6.0L Problems Forum
    Ok I have a 2004 6.0 and coolant is coming out of the cap. Generally I would think head gasket issue since the truck has had the egr deleted but no coolant in oil?????? Not sure what the problem is or what else could be causing this. Also sometimes the truck runs a little rough like its kind of...
  14. 6.0L Problems Forum
    Not getting any oil pressure while cranking, and the oil filter housing does not fill with oil while cranking and having someone push down on the valve. What is the best way to determine if it is a bad oil pump or a bad pickup tube? Is there something else i could be missing?
  15. 6.0 Motor problems
    2005 ford f350 diesel. Had been running fine. Had a oil change at a national chain. Then wouldn't start when hot. Took it somewhere else, redid the oil. To make sure right oil was put in. Still will start and run great after it sits. Will run fine but if you turn it off it will not start...
1-15 of 15 Results
Top