Search Results for ‘oil analysis’

Anyone know what that oil tube is? It runs right under the driver side exhaust manifold next to the oil filter. I’m losing a lot of oil from it… please help me and thanks I need to fix this

Just got a new blackstone report from the last oil change. Previously aluminum was at 10ppm and now it’s at 24. Fuel was 2.5% as well. My last oil change was rotella 10w30 and this time it was rotella 5w40. No reason I swapped than I wanted to do synthetic and I know it’s trusted. Truck has...

Just got my oil analysis back from blackstone. I decided to have it checked after I noticed my intake installed improperly for about 2k miles with a little dust past the filter. Report came back average on everything except for aluminum which was 17ppm and should have been around 7. Trucks...

Greetings everyone! Let me preface this with I was a die hard "T6 or bust" guy for years... ever since I got my company trucks in 2010. For the sake of this thread and discussion, it’s a 6 truck fleet of all 6.0 Powerstrokes (four are 2006, two are 2007) and those of you in here who know how...

Bought the truck on May 1, 2014 with 83,000 miles. Today, June 13, 2015 at 230,000. -100,000 out of warranty, deleted installed H & S (if I could do it over, I would pay for the extended warranty) -HPFP - ate itself at 131,000 - $8,000 cab off, full fuel system and injector replacement, egr...

Hello All, I have a 2001 F 250 PSD 7.3 with 217K miles. I run Amsoil 15W 40 HD diesel with a 2 filter bypass system. I routinely pull oil samples and have analyzed. I recently pulled a sample with 4K miles and when I received results back, it showed high oxidation but everything else was...

I have antifreeze in my oil. Not the other way around. The first result is from an oil analysis result after 2k miles stating high sodium and of 1/10 of a % glycol in oil result. The second test is my eye, although the tank is slightly brown, and does drop in level slightly, there are no...