Ford Powerstroke Diesel Forum banner

offset

  1. General 6.0L Discussion
    Looking for advice. I have 20x10 wheels with -24 offset, on top of that I have 305/55r20 Terra Grappler tires (so approx. 33x12 tires). The truck is in the works and is close to being done, has not seen the road with the new tires and wheels yet. I have recently heard a lot of bad things about...
  2. 6.7 Drivetrain Problems (2011-2016)
    Hello Gents, On my second F-250 now. Just purchased a 2015. I just put on my tires from my old 2010 and have rubbing on the wells when I turn - I know this is a much talked about topic but I'd really like to crack this nut. It's like a puzzle of utility and looks. Pictures and data speak...
  3. Wheels, Tires, and Brakes
    a friend is wanting to buy my factory 2008 f250 SD wheels. He has a 2003 F350 SD. the offsets are different and I don't know if they will fit or be safe. any help? F-250 Bolt Pattern (in): 8x6.69 Bolt Pattern (mm): 8x170 Offset Range (mm): 15 to 45 Front Center Bore (mm): 124.90 Rear Center...
  4. 6.0L Exterior Discussion
    Okay, so tires are a must leading into this winter. I want to swap out my wheels at the same time as well. My dilemma is, ultimately I want to end up with 20" Fuel Hostage wheels and 37" 12.50's (probably Cooper STT). Currently the truck is leveled only. I am wondering if anyone has any...
  5. Wheels, Tires, and Brakes
    Looking for new tires for my 02, f250. Went looking at tire discounter and they said I could only have a zero offset and my boyfriend said no, I could have a "decent offset". If the tire size matters I wasn't going bigger than a 33 with a 17" rim. I'm bad at deciding things and have been hearing...
  6. Wheels and Tires
    I have a 2011 f350 with a front leveling kit. I want to get 20" aftermarket wheels with 35x12.5s on them and I can't seem to find any good info on what wheel width, offset, and back spacing I need. I'll get a five inch rear block of I have to, and I want the tires to poke as much as possible...
  7. 6.0L Exterior Discussion
    Got a set off 22x9 dick cepeks with a +19 offset. Was told 2" spacers would work. Any specifics i need to look at with buying spacers?
  8. 6.0L Exterior Discussion
    I picked up a set of 22x9.5 Dick Cepek Torque rims from a guy Saturday for dirt cheap.. (One of those deals you cant pass up) Anyway, I was looking at the specs, and its 22x9.5 With B.S. 6.00" ET:+19mm. Wheel spacers are a must? or would 37x13.5's clear on 6" lift? Im just mainly worried about...
  9. 6.0L Exterior Discussion
    Anyone running 9.5" rim with 13.5" tires? If so, any bead leak problems or any type of fit issues?
  10. 6.0L Performance Parts Discussion
    I'm going to lift my 2006 6.0 with a rough country 4-4.5" lift. For my new wheels/tires... I was thinking 20" wheels, on 34"-35" tires.... I was going for a black and machined face wheel......I love the Helo 835, but they only come in a positive offset...
  11. Wheels, Tires, and Brakes
    I am not for sure what would look best on my 08 power stroke. I am looking at either -12 offset or -25. I want the wheels to stick out just a little bit from the fender well but not very far. Just wanted to see if anybody had any recommendations on what they think, or a picture of their truck...
  12. Wheels, Tires, and Brakes
    Just got an 02' F250 with a 4in lift with 35x12.50x18. The rub on the leaf spring is starting to drive me nuts. I'm leaning towards new wheels instead of spacers. I am wondering whether to go with a 9in or 10in wheel cause I dont want them to rub. I want it to have a nice stance and stick out a...
  13. 6.0L Exterior Discussion
    Thinking about buying new wheels and tires... the Mamba m2s have been growing on me and I am about to pull the trigger however, the specs concern me a bit. They wheels are 18x9 with 4.75" of backspacing and -6mm of offset. My truck is an 03 and it is leveled and the wheels will be wrapped in...
  14. 94-98 7.3L General Powerstroke Discussion
    Hi, I bought some Toyo MTs, 315/75R16 (35x12.5) to fit under my F-350 CCLB. I am looking at different black steel rims, I want a 16x8 rim, and it will need to be further on the outside to avoid rubbing against the leaf springs. What is the stock offset and/or backspacing of the stock rims...
  15. Wheels, Tires, and Brakes
    i got xd series hoss and am looking to get a level and 35s. the offset is 18mm and back spacing is 5.71 what does both of those mean?
  16. Wheels, Tires, and Brakes
    If a rim has a positive offset, does that mean that the outer part where the tire goes on is further away from the truck, or closer to it? And whats the offset of the 16'' stock rims? Thanks
Top