Search Results for ‘obd2’

Hi I’m having some trouble and was wondering if anyone on here had any advice. I have a 94’ f350 idi that had a 97 7.3 power stroke installed. I believe the transmission is aftermarket as well but not completely sure. I am having some issues with the transmission so I decided to plug in my...

Here's another clapped 7.3 update: Driving through the mountains of Colorado, I made a few observations: -Stomping the accelerator did not result in a puff of black smoke out the tailpipe like it normally does until I either downshift or hit boost -It started taking longer to rev up -I noticed...

Need some help. My truck will not allow me read the PCM through the OBD2 port. It will read the ABS, Airbag Systems and confirm that the OBD2 has power. The scanner is a Actron CP9690 Elite Auto Scanner. I have been through every fuse, relay, and stupid diode in the truck except for the ones...

I've just purchased a 2005 F-350 6.0 Powerstroke with 150k miles, and I'm concerned about avoiding engine failure. A full bulletproofing job is many thousands of dollars, and a knowledgeable fellow here in Arlington, north of Seattle, suggested that instead of doing that, I should purchase an...

hello, I was looking for an inexpensive OBDII scanner. There are many for 10-30 dollar range. Something that could be used by my iPhone. It seems conflicting as to whether they will work with a 6.0. It seems that some people say they work, but the descriptions generally say not for diesel...

Need Help! Electrical Problem: Hi Kaya or anyone else. Not sure if Kaya is here anymore? New problem. Electrical. Fuse box. Cig lighter / OBD2 no work. No power. I used power inverter in cig lighter and blew out fuse and sparked each time I replaced fuse. Now has good fuse in there and no spark...

Torque Pro question.... Is there any reason that my FICM would be reading so low and not reading EOT at all? 6.0 deleted, runs great, no issues. Not sure if this has anything to do with it, but since the last time I ran the Torque Pro app, I've changed my ICP sensor and had a short in my guage...

I know the majority of the "dongle users" are pairing with it thru Bluetooth...but is anyone using a wifi dongle and pairing that way? Reason I ask is I have a small tablet that is not Bluetooth capable but is wifi capable. And I have seen some dongles that are wifi...although it seems most are...

Like the title states, i'm looking for answers when it comes to sneaky deleting my EGR cooler. I cleaned my egr valve last weekend and saw that it was wet and cakey. My cooler has developed a small hole. I've been waiting for this to happen, and would probably put a BPD cooler in and build an...

Hey guys, just recently bought a 2001 7.3 powerstroke. looking around inside i see that right next to the OBD port there is an on/off switch. Has anyone seen a switch there before? trying to figure out if it is stock or aftermarket and what it does. Hard to trace because of all the wire back...

new hpop new icp new ipr was driving and truck just died no hic up no sputtering no loss of power just totally died. coasted off the road tried to start it again no crank. dash lights come on in pre start power windows work pulled ficim and pcm both check out ok. checked all fuses and relays...

Does any one know if there is an Ipad based scanner that will let me do a buzz test or contribution test? I hava a passenger E350 that I would like to know what is going on. Besides the test above I would like to set up a dash board with some instaments that are not in my cluster.

Does anybody know anything about using KIWI OBD Bluetooth devices for monitoring data with our 99-03 7.3s? I have a 2001 and have heard AND read that it has been known to not work on the 1999 models. Does that mean it will not work properly on my 2001? Wondering if I should take the risk of...

Fired up my truck after some routine maintenance and i hear what sounds like a knock. I hear tail of stuck open injectors sounding like a knock... Anyone know a good way to tell the difference? Also, theres a way to run an injector test... Do I need a obd scan tool to run it? Apperently the test...

Hi - I have a 94.5 powerstroke. It has the OBD2 plug under the glove box area. I wasn't able to pull any code data from the obd2 port, so I did a bunch of reading / searching on this forum and read about people swapping in 96+ computers to enable pulling complete code data via OBD2. I bought...