Ford Powerstroke Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 73 Results
  1. 6.7 Problems Forum (2011-2016)
    Brought home this 2015 250 on Tuesday night and left for the holidays a couple hours later. Hasn’t been drive at all in the five days since then. Neighbor showed me these pics of a these leaks under my truck, front and center, he noticed this afternoon. Claims he didn’t see them there earlier...
  2. 99-03 7.3L General Discussion
    I have this weird brownish liquid dripping out of whatever this is on the front of the motor here’s pictures you can see the liquid and where it’s coming from
  3. 94-98 7.3L General Powerstroke Discussion
    I have a 96 7.3 and I'm having a fluid leak from what seems to be the bell housing area. And I mean it looked like someone opened a faucet. I grabbed a sample of my trans fluid and its a thicker than my mystery fluid. Im thinking possible fuel leak from the block because there's fluid up the...
  4. 6.0L Problems Forum
    I noticed that my CAC tube connector was really oil soaked as well as the pcv hose going to the intake pipe. I was thinking I had an oil leak in the turbo so I took everything off and cleaned up the oil as best I could. Sprayed brake cleaner into the turbo till it came out clean and dried...
  5. General 6.7 Discussion (2011-2016)
    Just got done repairing a blown intercooler pipe on my 6.7 and I go to check the oil level and it looks dirty and has a greenish look to it. I'm running Rotella T6 5w-40. Is this normal? No noticeable coolant loss, not milky, and no odd smells. Just changed the oil about 1k miles ago. Previous...
  6. 6.4L Problems Forum
    Hey All, So as 6.4 ownership usually goes, it broke. I had excessive pressure in my coolant system causing me to replace the head gaskets. I had the heads checked and of course they were cracked in multiple places. So I ordered some Kill Devil Diesel icon aluminum cylinder heads for it. Got...
  7. 6.4L Problems Forum
    Greetings, I recently bought a 2010 F250 Super Duty with the 6.4L and I've noticed oil spots accumulating under the places I park it. When I look under the truck, I don't see any active leaking, but the engine certainly has some oil residue in various locations and I'm imagining it's only...
  8. 99-03 7.3L Performance Parts
    So, my factory lines at 170k mi, were leaking at the seals. I thought, hey why not replace them? New lines came with fittings and a xover line, which I did not use or care to discuss, but after initial install began leaking at same fittings. Now after 3 X r&r LEAKING! Has anyone tried replacing...
  9. 6.0L Problems Forum
    I picked up my first diesel this week and got it home to find a massive oil leak. Yippee. Now I’m worried the seller was offloading a bed plate issue onto me in worst case. it’s a 2006 6.0 powerstroke (egr delete, studded, no chip) and the bell housing and oil pan are covered from both sides...
  10. 99-03 7.3L Powerstroke Problems
    Hello, new here and was hoping I could find some answers, couldn't find a thread pertaining to this specific scenario. Working on a 2002 excursion with a 7.3 fresh rebuild on the engine have been weeding out small problems and I think I'm getting close. Wouldn't build icp past about 30 psi, took...
  11. E-Series Van Discussion
    Hey folks! So I did a head gasket change a while back and in a not very proud moment, I neglected to get new valve body gasket. It seemed pretty heavy duty and I didn't realize it was something that needed to be changed. As a result I am getting some oil leaks on the back driver's side. When I...
  12. 6.0L Problems Forum
    For about 3 weeks now, I have been unable to start my truck after doing standpipes, dummy plugs, oil cooler, stc fitting, and injectors(A lot of time waiting on testing tools). Testing through the IPR, there is evidently a large HPO leak as you can hear a large air leak on the driver side and...
  13. 6.0L Problems Forum
    I had posted about this a couple weeks prior. So, found fuel in oil. Literally more fuel than oil. pulled all 8, all the o rings look like they did when I installed them. Re sealed one for giggles. Still fuel dripping out of the drain plug. Isolated driver side injectors, no drip. Isolated...
  14. 6.7 Exterior Discussion (2011-2016)
    I've searched and failed. Lol. I'm getting a couple small drips of water through the driver side grab handle. I know this is typically the sunroof drain. What I cannot find for the life of me is the drain opening on either end. Due to a recent organ being removed I am somewhat limited in how...
  15. 6.0L Problems Forum
    I purchased a 2004 Ford F-250 a few months ago. I haven't had any issues, other than changing out filters, cleaning, etc. When I first checked the coolant, it was low. I topped it off. This was September or October when I purchased the truck. 2 days ago, it was low again, so I topped it back...
  16. 99-03 7.3L Performance Parts
    Hello everybody, I’m sure this is a commonly talked about problem but id like some help with my issue... I have a 95 f250 7.3, it’s an old beat up truck but I bought it to tow. So recently I’ve started noticing a lot of problems. I was towing a trailer with a rzr on the back running about 60...
  17. General 6.0L Discussion
    Last week I bought an 03 6.0 and I’ve noticed since then that there is coolant leaking from the degas bottle. The bottle itself, oil cooler, and egr cooler have all been replaced within the past couple years and I have the paperwork showing it was done. Once I started noticing it leaking I...
  18. 6.0L Problems Forum
    Got a wierd leak around my pulleys. Took a closer look to see if it was my passenger side block. But I seems to originate a little bellow it. Seems like it's a lot of leak. But I think it's been going on for a while. I haven't noticed any leaks on the ground. Until I decided to take a look...
  19. 6.7 Problems Forum (2011-2016)
    Have a 2015 F250. coolant was a touch low so I added some about 2 months ago. Noticed an antifreeze smell this morning and looked. Main engine reservoir was almost completely empty. Have had no engine problems. It also has not been running hot. Looked all under the truck and cannot find it...
  20. 6.0 Motor problems
    03 f250 6.0 2 mech said it was my icps so i change it but i still have a lot of oil pouring out of top of engine doesn't look like filter housing or censer whats next?
1-20 of 73 Results
Top