Ford Powerstroke Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 6.0 Motor problems
    2005 E 450 (No start). Plugged in my ScanGuageII and this was my reading, ICP cranking, 20 FMP cranking 48.5, SYC cranking 1yes, IPR cranking 84.71. Replaced ICP sensor with new pigtails and replaced IPR valve. Now IPC cranking at zero. Could it be a wire problem? Please help, mav52.
  2. 94-98 7.3 Motor Problems
    96, 250, mostly stock motor. +300,000 miles. This is a mud truck not a daily driver, the motor sits about 7 ft in the air. It was running a little rough at the last event we brought it to, when we got it home we were pressure washing it while it was running ( I know not a great idea) and it...
  3. 6.0L Problems Forum
    early '04 6.0 .....How to tell if the HPOP, IPR, IPC is bad with the Auto Enginuity, will this tool help me narrow it down to one or the other. I Dont want to through money on parts that are not bad. The engine was just rebulit with all the bullet proof stuff done to it, but used the old HPOP...
  4. 6.0 Motor problems
    I just did the bullet proof and re-ringed and new bearings, APR studs, head gaskets, oil cooler, egr deleat all gaskets and seals, the engine back in and runs great sitting there, nice spool and sounds strong, but no power when going up a hill, shut the truck off when it's hot it wont...
  5. 6.0 Motor problems
    first let me say that this is my first post, ive been lurking and learning on this site for almost a year now and the knowledge ive gained so far has been EXTREMELY helpful, so thanks to all!! now the problem. this weekend i replaced my hpop and oil cooler due to a hard/no start condition...
1-5 of 5 Results