Ford Powerstroke Diesel Forum banner
injector
1-20 of 124 Results
Advanced
  1. 6.0L Problems Forum
    Does anyone know what the solenoid bolt and nut size is? Particularly the nut size and thread pitch? I cleaned the spools on my injectors a month or so ago and it’s been running amazing. Noticed a miss the other day while driving and got a p0281 code. Read that if the spool valve nut isn’t...
  2. 99-03 7.3L Powerstroke Problems
    I looked for a similar post and could find one, so I apologize if I am basically reposting. I just put 200cc/30% injectors from rosewood diesel in my truck, along with ARP head studs, CNCfab 4 line feed, bellowed up pipes, new under valve cover gaskets. It took me a few weeks, but I finished up...
  3. 99-03 7.3L Powerstroke Problems
    Hello, new here and was hoping I could find some answers, couldn't find a thread pertaining to this specific scenario. Working on a 2002 excursion with a 7.3 fresh rebuild on the engine have been weeding out small problems and I think I'm getting close. Wouldn't build icp past about 30 psi, took...
  4. 6.0L Problems Forum
    Hello All, Just joined and first post here. I have a 2005 F350 Ext Cab. I’ve been having what seems like stiction issues. Have tried Archoil, Rev-X, T6 5w-40 Sythetic and it helped some. Was towing my 3500# travel trailer and engine started missing. Got a P0271 and P0272 code and it’s obvious...
  5. 6.0 Motor problems
    Couple weeks ago, truck started dumping black/blue smoke and then died. Beat my head on the steering wheel on the shoulder of the highway. couldn’t figure out what happened. Three cylinders 1,5,7 contribution balance codes. Started a discussion here, got some great advice/tips. Came to...
  6. 6.0L Problems Forum
    Has anybody had any experience with an injector going bad after a short period of time? I had just installed 8 Warren Premium 155/30’s and the truck ran perfectly fine for about 50 miles, and the truck suddenly started running like crap. Brought it home, truck had a cylinder #3 contribution...
  7. 6.0L Problems Forum
    Hey guys, I have had my 05 6.0 for a couple years now and the last year I’ve been tracing down this really odd issue that no one seems to be able to figure out. The issue all started with me replacing my injectors and ficm. I did all the work myself and know for a fact that everything mechanical...
  8. 6.0L Problems Forum
    I've been combing the boards off and on for a year and throwing parts trying to sort this out. If it's been covered, I apologize. At first, it seems to have been covered a thousand times, but my issue is slightly different from all the others, so here it goes ... 06' 6.0 idles pretty good for...
  9. 6.0L Performance Parts Discussion
    I'm going to build my truck but I don't know where to start. I want to stay non vgt with a 366 but there isn't much info on anyone running them and a build list. Also if you are running one what kind of power are you getting out of it? And can you still tow a decent amount without your egts...
  10. 6.0 Motor problems
    Hey guys, new to the forum and have a question. I recently picked up a 2006 f350 with the 6.0L Powerstroke in it as a summer project, and I'm getting a crank, no start condition (cold). This is my first 6.0 so help is much appreciated! Truck/Conditions info: 2006 f350 6.0 factory head bolts...
  11. 94-98 7.3L General Powerstroke Discussion
    I’ve gone through and rebuilt some ad injectors this last weekend and for the first 5 everything went great. However, I’ve had a couple that I had to stop rebuilding completely due to the fact that some didn’t have the metal gasket that goes in between the solenoid and the metal spacer. Do you...
  12. 94-98 7.3L Problem Forum
    I have an old farm truck im trying to get running after it has sat for a few years. Ive been using this flow chart to try and find out the problem. https://cpaddict.com/content/7.3nostartchart.pdf Everything on this list I have personally checked and/or replaced and its working how it should...
  13. 6.0L Problems Forum
    Hi All I have a 2004 F450 6.0, 4x4, flatbed dually dump, deleted. Truck has around 230K (although I have no idea the miles on the engine as its been replaced), I've owned for about 2 years and 5K miles. The issue started when I noticed a fuel smell and loss of top end power when towing...
  14. General Diesel Discussion
    So I had whitish bluish smoke ONLY on start up and a few minutes after when the engine was fairly cold, so I replaced the glow plugs and a whole list of things which took just over a month. I had trouble with glow plug on number 6 cylinder it was stuck in due to carbon (I finally got it out) and...
  15. 6.7 Motor Problems (2011-2016)
    I just got a 2014 6.7L through work. It’s got 135k on it and a new remaned short block with full emissions delete. When I got the truck I noticed it was throwing the following codes: P0284 Cylinder 8 Contribution/Balance P0263 Cylinder 1 Contribution/Balance as well as P02CE and P02D0 which...
  16. General 6.7 Discussion (2011-2016)
    New to the forum, and although I have a lot of learning to do when it comes to navigating the site, I’m nearly positive I am the first, and possibly the only one, interested in doing something like this. Now to my question: My dad can turn the motor over in his 01 Ranger without the injectors...
  17. 6.0L Problems Forum
    05 6.0 f350I just did headgaskets studs injectors stand pipes dummy plugs cleaned turbo blue spring kit and when went to prim fuel made a load pop idk what it was then got truck running and had miss found leak in hpop rails and fixed still have miss but can't find a leak and truck won't build...
  18. 6.4L Problems Forum
    Hi been using these forums for a while now, but my first time posting. I am working on a 2008 ford F550 6.4L that keeps dropping the # 8 injector. It starts fine and runs fine till the high idle kicks on. Im using an Apollo D8 Snapp-On Scanner. Once the high idle kicks on the balance...
  19. 6.4L Problems Forum
    Replacing Injector 7 on a 6.4 and while taking the injector bracket off, the T-47 bit came out of the socket and fell into that port just below and to the left of the injector. How far does that go down and where does it lead? Hope I don't have to pull the head!!! Any help would be much...
  20. General 6.0L Discussion
    I am aware this has been discussed many times before, however money is tight and I cannot afford to throw parts at the truck at the moment. The motor has Studs, CAI, Alliant 155/30 injectors which are 1 year old, Coolant bypass kit, EGR is deleted, Blue spring mod, 4" turbo back with a muffler...
1-20 of 124 Results
Top