Ford Powerstroke Diesel Forum banner
injector issues
1-8 of 8 Results
  1. 6.0 Motor problems
    I recently posted about an issue I'm having with my '06 F250. The original post was a little long in the tooth as I wanted to outline the entire scenario. http://www.powerstroke.org/forum/6-0-motor-problems/1071490-06-running-rough-after-dying-highway.html The truck sat for a few months while...
  2. 94-98 7.3L Problem Forum
    Here’s the story, always wanted a OBS 7.3 truck but I have a 1996 crew cab 7.5 4x4, in great condition. Well I picked up a wrecked 1996 7.3 dump truck and swapped all the harnesses, and components into my truck. I cleaned up the motor, put new exhaust manifolds, up pipes, and rebuilt the turbo...
  3. 99-03 7.3 Motor Problems
    I have a 2000 F350 4x4 7.3 with issues First I will cover the basics to get that out of the way: The motor is less then 2 years old, from Ford right 30k mileage on it The injectors are approx 2 years old with 1 & 3 being brand new. HPOP was replaced less then 5k miles ago along with IRP (ICP...
  4. 99-03 7.3 Motor Problems
    Symptoms: -Rough idle/distinct knock that is worse when engine is cold -Lots of white smoke on cold start (unplugged)-Some white smoke when plugged in -Strong smell of diesel at all times -Loss of power -Terrible fuel mileage Timeline: 1) Excursion was filled with gasoline accidentally 2)...
  5. 99-03 7.3L Powerstroke Problems
    :confused: Hey guys so i have a problem with this truck i just put new injector cups and stage 1 ffd single shot injectors in along with a ts 6 pos with beans tunes, also replaced glowplugs and uvch but still rough idle and no power ive tried everything the icp is good the ipr is good i cant...
  6. 6.0 Motor problems
    Recently my truck started smoking while I was driving it. Just had most of the major things done to her ie studs, egr delete, new oil cooler. Currently in between monitors, sold off the old stuff and waiting on the sct ts. Of course this would be when I get a problem lol. Smoke started while...
  7. Engine 911
    One of my customers installed a reman 6.0 Powerstroke engine. Everything was great but within a couple weeks, he had a rough runner. The shop (Ford Dealership) determined that combustion somehow got past the brass washer and burned the o-ring on the injector. A new injector was put in and a...
  8. Engine 911
    I not too long ago purchased a 2002 7.3 f250 ran fine for a while then the issues started , I had the hpop, Injector cup,s o rings and passenger side head replaced which allowed the truck to run perfect . About 2 week after repairs the motor started running like Hell shut her down immediately...
1-8 of 8 Results
Top