Ford Powerstroke Diesel Forum banner
icp pressure
1-3 of 3 Results
  1. 94-98 7.3L Problem Forum
    Hello everyone I have a 1996 f350 with the 7.3 i bought about 3 months ago, i have replaced the pcm, icm, icp sensor, hpop, overhaled the engine, had injectors tested, and the truck will not start, the injectors are not firing, iv got the code p1280, and hpop reads 2480psi when i turn it over...
  2. 6.0L Problems Forum
    I have an '06 F250 with the usual mods: studded, egr delete, full Banks setup and a SCT Livewire TS. When I accelerate ( foot to the floor ) my ICP goes to about 800, the turbo spools to 20psi and the exhaust howls like a big dog but the truck doesn't seem to move quickly. When I accelerate...
  3. General 6.0L Discussion
    I have found a list of reading like trans temp, coolant, fuel press, egt, boost, and oil temp. But I am looking for all the other stuff that you can monitor with SCII like VGT duty cycle, ICP pressure, etc...... I have been digging threads for each reading, I would just like a Master list of...
1-3 of 3 Results
Top