So I have a 2006 F-350 6.0 with a 6 speed manual. I did the high idle mod connected a switched 12V wire followed by a 10A fuse to the green wire with the purple tracer. Push the Ebrake in and flip the switch and nothing happens. My light does come on on my switch so I know my circuit is complete...

I have an 08 f-350 with the 6.4 and i tried doing the high idle mod and i hooked it up but nothing happens i also have the sct livewire programmer installed and the truck already idles around 950 rpms. Would the programmer be affecting the mod? thanks for the help

I'm thinking about installing a high idle on my 6.0 by using a piggy back to hook the high idle wire to the parking light switch. Any suggestions?

Hey guys wanted to see if I could get some help I just tried hooking up my high idle on my 08 6.4 to upfitter #4 I connected the yellow/green wire to the brown. I'm 99% sure I'm doing everything correct. The truck is started in park and the ebrake is to the floor. I havent used butt circuits yet...

I INSTALLED THE HOGH IDLE MOD ON MY 6.0 AND IT WORKED GREAT BUT NOW SOMETIMES IT CRANKS WITHOUT EVEN TURNING THE SWITCH ALL THE WAY OVER. ANY THOUGHTS?