Ford Powerstroke Diesel Forum banner


  1. Cold Start Problems HELP!

    Diesel Diagnostics
    Went to start my truck this morning. Sitting all night in -6° C. So it’s not that cold but I guess enough to throw the truck off. Starts fine in warm weather. But this morning wouldn’t start at all. Turns over and would randomly get a fire but it would either last a second of running and turn...
  2. Weird suspension setup

    General 6.0L Discussion
    Hi All, First time poster, long time reader. I bought a 2003 F350 Crew Cab Dually. It has has a 2010 front end conversion, including going from leaf springs to shocks and springs. I bought a leveling kit from Skyjacker (a 2 inch block to go under the springs) But everything is WEIRD. Instead of...
  3. 2003 - Crank/no start - “just give it a few” then starts HELP!!!

    6.0L Problems Forum
    Hey guys! I’m never started a discussion before, but I do a lot of digging around here when I have issues- y’all are great! Here’s my issue/background : 135k - have had injectors done, fuel tank, erg delete, oil cooler, ficm updated For the last 3-4 years, the truck has had a “hard start”...
  4. 2008 Power stroke turbo

    6.4L Performance Parts Discussion
    So to start i know alot about my truck but not everything. :crying: i have bad turbo lag do you buildup in the turbo system on the low pressure side so it is shot i was wondering is it worth going to a single turbo set up. or just replace the stage with a stage 1 and if i do a single set up...
  5. PLEASE HELP Ford 6.4 Boost Problem

    6.4L Problems Forum
    Hey guys this is my first post, so I have owned this F250 for a month now, and have had a few issues i'd really like to fix. It has a Code for Cylinder 2 Contribution/ Balance (P0266). It misfires when cold sometimes but runs ok once warm. But a hour ago I was helping my friend do clutch on...
  6. P1211 & P1212 with a miss

    94-98 7.3 Motor Problems
    got a 1995 F350 with 7.3, had since 1997, 592K actual and the engine is sound. last trip from MI pulling Jayco 33ft Eagle it started missing. Manifold heat showed 5&7 running cold. R&r both and also v/c gaskets and internal harnesses both side. runs ok when it starts and then after about...
  7. Buying a 2005 6.0L or a 2008 6.4L?

    General 6.0L Discussion
    So I'm looking at two trucks... First is an '08 F350 with 189,600 miles on it for $18,000. Tons of upgrades: -6" engineered lift (done at 125,000 mi) -King shocks and fox racing shocks in rear with air bags -Head gasket and studs done at 155,000 mi (ARP Studded heads) -Egr/dpf delete...
  8. E4od Surging

    Tranny 911
    A couple months ago my 97' F-250 5.8 (I know Its not a powerstroke but I really need help I'm only 16) started surging upon acceleration, it only does it in drive though if I manually select any other gear it is fine. It's like I'm hitting the throttle over and over as the RPM's just surge. I've...
  9. First post need input!

    6.0 Motor problems
    Hey all, This is my first post but I've been browsing the forum since my purchase of my late 04. I got the truck from a good friend of mine about a year ago and it ran perfect at the time of purchase and the whole time he has owned the truck (I know because I have spent a lot of time with the...
  10. I need a little help on a purchase

    Arizona Members
    Hey guys, I have been scouring craigslist for what looked like deal on a low mileage 6.0 that had been bulletproofed. I went and looked at it today and when I was looking at the VIN it showed 09/03 as the build date. So we settled up on 14,500 being the purchase price. Well the title isn't...
  11. Help identifying parts

    6.4L Problems Forum
    I bought a 08 F-250 with the 6.4 and was in the process of doing my first oil change. I pulled open the filter and a small piece of something flew out and bounced into the compartment. I fished it out and then looked down into the place where the filter goes and there is a spring laying in the...
  12. Reduced Power??!! Help!

    Engine 911
    I'm less than 2 months and less than 3000 miles into what I thought was a good deal and BAM! having trouble and looking for help. I've got a 2008 F-250 with the 6.4 (118,000 miles) - first time in a long time back in a Ford and first time ever in a diesel. Everything has been fine until the...
  13. Oil cooler advice..?

    General 6.0L Discussion
    Hey everyone! first of all happy fathers day to all you dads out there! So anyways my 06 6.0 needs an oil cooler for sure. 200 ECT and ive seen up to 233 EOT. not good at all. im actually still scared it those numbers did some damage though it was only for maybe 5 minutes.. i really wanted...
  14. Service Advancetrac/ Hill Descent Control Fault 14 6.7

    6.7 Motor Problems (2011-2016)
    So I have a tuned 6.7 2014 with about 23,000 miles on it. For most part, truck runs great and have had no real issues. H&S is on performance and its a blast but i rarely get on it. I have been at the beach for a week now in Port A, and I noticed (after doing a couple do-nuts on the beach :) that...
  15. 7.3 overfuleing

    99-03 7.3L Powerstroke Problems
    I have a 99 f350 that is using oil. It would burn about 2qt in 100 miles (leaning toward injector o rings, or turbo pedestal o rings). But I'm starting to think I have bigger problems. All I know about the truck is that it has a 80% nozzles, a d66 1.10 non wastegated, and ts-6. I don't know what...
  16. Left turn signal malfunction

    99-03 7.3L General Discussion
    My left turn signal flashes faster than the right, Only the front bulb comes on, the rear bulb does not flash. I replaced all bulbs, flasher relay, and turn signal switch and that did not solve the problem. All other lights on the vehicle function normally. Anyone know what may have caused this?
  17. U-joints And possible Ball joints

    6.0 Drivetrain problems
    Hey y'all, Im doing my front axle u-joints on my 06 350 and was wondering if anyone had a parts list and possibly a part number list as well. Once side already had the ball joints done, both upper and lower, but the mechanic some how didnt catch that my u-joint was out so now instead of spending...
  18. Hard start/no start hot

    Engine 911
    So my trucks been sitting for about two days ran fine started right away before. So today I go bout get in the truck and it just cranks and cranks and cranks. I unplugged the egr valve(for testing purposes) and it cranked for about 30 seconds then started. So I thought the valve was dirty and I...