Ford Powerstroke Diesel Forum banner
help
1-20 of 44 Results
  1. 99-03 7.3L Powerstroke Problems
    Hey Everyone, I needed to see if anyone has had this issue before or could help figure it out. Of course it’s on my everyday truck and renting a car for a week isn’t working.. This just started a couple weeks ago but while accelerating my ICP pressure drops to 560 or so, and has almost no...
  2. 6.0L Problems Forum
    2005 6.0 super duty. I did a 6.4 starter swap on my truck about 5 months ago. Today I went under to degrease the oil off the starter and heads. After I did that and washed it my starter started making electrical shorting noises/sizzling noise and slightly smoking. Mind you the truck was powered...
  3. 6.7 Problems Forum (2011-2016)
    Hi I own a 2011 f-350. After several bad diagnosis and a set of fuel injectors later I’ve basically come to the conclusion that I need either a new engine or basically rebuild the old one. Ford originally told me I just needed a new injector and radiator cap. Well after replacing all 8 injectors...
  4. General 6.0L Discussion
    2004 6.0 with the 6 speed standard. Cruise control worked up until recently no lights on the dash, new multifunction switch, one weird thing; when I hold the on button for the cruise and hit the coast button the horn honks, it still honks with the horn button as well. Any ideas?
  5. 6.0 Motor problems
    I’m working on a 2006 F350 with a 6.0 for someone else. I haven’t worked on the 6.0s before but I have a ton of experience with the 7.3s. Now for the details. History: (from what I was told) Truck has 268k Cranks but doesn’t even try to start I was told that the truck was running fine then just...
  6. 6.0L Problems Forum
    Ok so back story is I just bought the truck and I don’t know much about it. The lady I bought it from didn’t know much either. I got it home threw some good spare batteries in it and got it too fire up and I heard this knocking. Sounds like a spun bearing to me but I wanted to get opinions from...
  7. 6.0 Motor problems
    hey guys hopefully someone can help me out. i got a 2004 6.0 and it’s got no low end power it’s like the veins on the turbo aren’t moving but my exhaust brake works. so the veins aren’t stuck. i read on a different thread that the 03 engines got a flash that didn’t use the exhaust back pressure...
  8. 6.0 Motor problems
    hey guys i got a 2004 6.0 tuned and some other mods like studs and a new oil cooler updated sct fitting and so on it has been a project truck as i have encountered a lot of issues along the way. i bought it knowing it had a oil leak i’ve replaced the oil cooler gaskets, oil cooler, hpop gasket...
  9. 94-98 7.3L Problem Forum
    Hey, so my truck has been shutting off randomly for a few weeks and seems to get worse when it rains. The wait to start light comes on and it restarts on its own, or it will stumble for a second or 2 and then shut off and I can restart it and it’ll run fine. Which seems weird. I’ve also noticed...
  10. 99-03 7.3L Powerstroke Problems
    Hello! E99 with 200k something miles Auto trans Bought this truck from an auction. Truck was in a wreck, bought it 2 years ago and now getting around it fixing it. Starts great, idles cleanly, and revs nice and cleanly too. When I put it in drive however, it doesn't act right. I can't really...
  11. 94-99 7.3 Repair Help
    I'm still diagnosing a crank no start after 3 months... I bought the truck 4 months ago, it was running/idling rough and had very hard starts. I've been working on it since. It is a 1996 7.3 F250 4x4 Supercab, 318k miles, #4 injector recently replaced (3.5 months ago right before this extended...
  12. 6.7 Problems Forum (2011-2016)
    Hey guys I’m new to the group , I’m having a weird grinding sound at 35mph when I let go of the gas n get back on as well at 80mph . It’s coming from the front passenger side were ive recently replaced the wheel hub and a ball joint . I have a brand new driveshaft , I do have a bent rim in the...
  13. 94-98 7.3L Problem Forum
    1995 7.3 4x4 Hi I recently had a my fuel line on the back of the block on the passenger side pop off and it sprays diesel everywhere while under pressure. I've done a fuel bowl delete amongst alot of other things and put in a fuel labs psi gauge (it's e fueled). In place of where the stock...
  14. 6.7 Problems Forum (2011-2016)
    Hello fellas, and ill thank yall in advance for any help!! I have been googling this issue for almost 5 months now, i have raped the internet trying to find the solution and STILL NOTHING! so i hope you guys can point me in the right direction. anything over 60% throttle i get this horrible...
  15. 6.0 Motor problems
    So I thought I had solved all my issues, but it appears there's another (a few?) still lurking. Sorry for the long post, but it's been a long week, and I wanted to present the full picture. Thanks in advance for taking the time to read and any advice offered. Here's the rundown: Had been seeing...
  16. 94-98 7.3L Problem Forum
    I have a 1997 f250 and engine starts and idles fine but when given gas it starts to knock and check engine light comes on and when it comes back to a idle it has a knock now and check engine light comes off Please help I have no clue what to look for
  17. 6.0L Problems Forum
    I've been combing the boards off and on for a year and throwing parts trying to sort this out. If it's been covered, I apologize. At first, it seems to have been covered a thousand times, but my issue is slightly different from all the others, so here it goes ... 06' 6.0 idles pretty good for...
  18. 6.0L Problems Forum
    I just bulletproofed a 2004 6.0 I did head studs rebuilt oil cooler and did the seals on the oil pump but never took it apart. So I got it all put back together and crankkkkkk no start I also did the ICP valve in it and 2 connectors on the ficm are broke pushed them in tight gave it a crank I’ve...
  19. 99-03 7.3L Powerstroke Problems
    I'll try and keep this brief. Couple weeks ago the old 300,000 mi 7.3 started acting up. would fire perfect, then start to buck like it was dragging a cylinder or two. Then it would get warm within a block or so and run fine until I shut it off. Outside temps were 70+ degrees and block heater...
  20. Wheels, Tires, and Brakes
    Hey guys, I’m new here because I’m trying to figure out what’s going on with theses brakes. I had the right rear caliper blow out on me the other day so I replaced it and the soft line going to it after bleeding every corner And a gallons worth of brake fluid my peddle is still spongy and soft...
1-20 of 44 Results
Top