Ford Powerstroke Diesel Forum banner

head

  1. 99-03 7.3 Motor Problems
    I have a 7.3 that has a slight hesitation at start, then blows white/ blue smoke. The injectors were just gone through by a reputable shop and orings replaced. Reinstalled and still the same issue. So, im looking at compression/headgasket, correct?
  2. Performance & Drivetrain Parts
    I part out 7.3 powerstrokes and I have 2 sets (4 total) heads. Both are off of 1999 7.3s one set with 164,000 miles and one set with 163,000 miles. The engines were running when they were pulled, the trucks were crashed. Make an offer, I want them gone. They would have to be pickup only because...
  3. 6.0L Problems Forum
    Im fairly familiar with what puking coolant means... head gaskets. I thought thats what it was. I took it to a Ford Dealer and an independent shop and they each ran 3 separate head gasket tests and the truck passed all of them perfectly. No blown head gaskets. Having said that, I have no clue...
  4. 99-03 7.3 Motor Problems
    Has anyone seen this before? I had two pushrods bend and one seems to have broken a chip off the inside of the head. I installed a new pushrod and motor seems to be idling fine. Im not sure I should be driving it around with that chip floating around in there. Does anyone have any idea what...
  5. General Diesel Discussion
    Ok i have a early 2003 6.0, its drinking about a 1/4 of a inch of coolant when i drive about 250 miles. a few weeks ago i had to replace the radiator. i was driving down the road the next thing i see is steam comming from under the hood, so i pull over and coolant is every where. so i replace...
Top