Hi, Any recommendations on a trustworthy shop to do heads on a 2003 Ford 6.0? I expect I need the heads resurfaced, new gasket, and head studs. I plan to test my coolant pressure under load after seeing coolant pool around cap. I thought about replacing the original degas bottle but if the...

I'm doing an in cab head gasket replacement for my 04 Excursion. Everything has been going fine and I'm almost ready to put oil back in this thing! However, I have a problem. I forgot to position the fuel lines for the filter housing before putting the drivers side head on :doh: It seems like...

So I used the block chek today to determine if my head gaskets were blown.... Lucky me, it appears they are! :doh: Only 80K on the ol gal. I called a local powerstroke shop who informed me I would most likely need new heads since 90% of the ones they have seen are cracked, they can't mill them...

Hello, I'm a new joiner to this forum and this is my first post. Sadly, its a post about a problem I have with my 2003 F250 6.0 PowerStroke. The truck was running great before i found out that it had a head gasket problem. After doing my research an my home work i did the following to the...

I recently bought a superchip for my 05 super duty. and not suprisingly, i stretched my head bolts and now i have been installing the 6.0 problem solver from mkm customs.... In my two car garage... i've got both gaskets and egr delete and the new oil cooler installed, but i have hit a...