Ford Powerstroke Diesel Forum banner

harness

  1. Performance & Drivetrain Parts
    I had a fire under the hood. Need 3 wiring harnesses. Have been unable to get part number, but have been told by multiple dealers that harnesses are discontinued. My truck is a 2004 Excursion with 6.0 (engine is 2003 build). I am looking for anyone who may have these harnesses to sell, or, if...
  2. 6.0L Ford Excursion Discussion
    Wondering if someone can help me. I’ve been looking for a wiring harness for the reverse sensors. My previous owner replaced the rear bumper and discarded wiring harness for the sensors. He said he didn’t think he would need it anymore :frown2: I called our local Ford dealer and they don’t have...
  3. 6.0 Motor problems
    The topic of harness chafing has popped up in a couple of threads today. @mikeb01453 suggested posting information as a separate thread (this one). It seemed better than filling both of those threads with the same info. So... the topic is chafing. Post whatever info or suggestions...
  4. 6.4 Powerstroke Interior Discussion
    Ice storm cam and a tree fell on my truck 2008 f250 crew cab 4x4 lariat. I didn't have full coverage so I'm having to fix it my self now. I got some serious tech questions I need some help with I bought a 2008 xl cab with the complete dash intact mine was crush so I'm trying to swap the only...
  5. 911 Urgent Situations
    Hi, I have a major problem on my hands. I've got a 2001 f550 4x4. It has a 7.3, automatic transmission with a manual transfer case. I somehow managed to get my transmission harness and my chassis harness wrapped around the front drive shaft while driving in the last snow and ice storm we had. It...
  6. 6.0 Motor problems
    I have a 2003 Excursion with a 6.0L Powerstroke. It recently developed a misfire on cylinder #2. I bought an AutoEnginuity Scanner and did lots of troubleshooting on it this weekend. I've read a lot of good information here, but I haven't read about the exact same problem (i.e only one...
  7. 6.0L Electronics Discussion
    I'm having some trouble installing my H13 hid kit in my '07 F-350. I'm using a relay harness for it. I have it installed (as best as I can tell), exactly to the specifications on the wiring diagram on the inside of the box. However, when the low-beams are supposed to turn on, nothing works. Then...
  8. 99-03 7.3L General Discussion
    Can anyone post a pic of the wiring harness attached to an 01 exc accelerator pedal with the single combined aps/ivs wiring connector. I have to replace the head and the new head came with all white wires. I need to see which color wire coming of the Exc harness ties into which slot on the new...
  9. 99-03 Ford Excursion Forum
    Trying to replace the Accel Pedal Sensor on my 01 Ex 7.3l to accomodate a tuner. The wiring harness for the tuner that is supposed to plug into accelerator sensor is a 10 wire single head and the accelerator on the Exc is a dual head accelerator with two smaller heads and only 5 wires combined...
  10. Towing, Hauling & Diesel Competition
    Trying to install a cheap'o autozone brake controller in my early 99' F250. I was told there is a pre wired harness already under the dash and all I need was to buy the harness adapter kit and plug it right in. The only two open plugs I see under the dash are a huge gray rectangle one and a...
  11. 6.0 Motor problems
    I finished installing an EGR delete on my '03 F250 yesterday. When I went to fire the truck up, it would just crank and crank. Finally got it to start, and let it idle for 10 minutes. Idle was rough, and was slow to build RPM's when pressing the throttle. The standard diesel injector knock...
Top