Installed a Glowshift fuel pressure gauge a few weeks ago. Pressure read fairly consistent, but dropped pretty sharply to about 20psi or so at WOT. Installed a Blue Spring update. Pressure came up to about 60psi at idle and would drop to about 40psi at WOT. All was good for a couple of...

Been in a few days of emails with Glowshift gauges......That being said I have had their gauges for 7 years.... First time I have emailed their support....Justin was awesome....Took me thru testing, found out it was the gauges themselves not the probes....Gave me a reduced price on new gauges...

Im finally growing smart and getting gauges for the ole sixo, im not sure what brand to get though, everything i read about glowshift is bashing them, talking about how bad they are, but what so bad about them? They have the best prices that ive found, and the gauges im getting are egt, boost...

ok i have four glow shift gauges the fuel pressure gauge was working for about 3 1/2 days then just pegged out at 100 psi. i checked my ground and have a complete circuit. when i ohm the wire going back to the gauge with it on the sending unit i have some high ohms when you lift it from the...

ok i have four glow shift gauges the fuel pressure gauge was working for about 3 1/2 days then just pegged out at 100 psi. i checked my ground and have a complete circuit. when i ohm the wire going back to the gauge with it on the sending unit i have some high ohms when you lift it from the...

For some reason my glowshift boost gauge is dim. I have three gauges wired together but the other two, trans temp and egt are fine. Is it possible a short in the dimmer option? I dont have any of the dimmer wires connected.

I jut installed an egt temp, trans temp and boost gauge and when I turn my headlights on the boost gauge flickers. I have the 3 crimped together hooked up the headlight switch and only this one is doing it. The gauge reads fine but the color resets every time I turn it on. Thanks for the help in...

bought a triple pillar pod from glowshift with the boost gauge, trans temp gauge, and egt gauge. took all day to install. some of the stupidest designing of a product ive ever seen. had to create 3 wiring harnesses. thank god i had mike (mudrunninpig) with me to help or i would have been lost...