fuel bowl

:confused: ok I'm about to pull the trigger on a regulated return. Not a big deal, I'm also going to tackle the bowl delete, also not a big whoop. What is confusing the ____ out of me is the pump deal....I understand you have to have a post pump deal. If I am understanding correctly, this post...

Hi, I have a 1997 f350 power stroke, I recently cleaned and rebuilt my fuel bowl with the dieselOrings kit. Filled up filter bowl with diesel clean bled the system through the shredder valve, and truck fired up, let it warm up drove around town. Then check engine light came on truck had a few...

I just did an e-fuel conversion on my '96 and have the stock fuel pump and fuel filter bowl assembly. They both worked fine when they were removed. Make an offer

So I changed my filters last week on my new to me 2008 F250 (140k miles) after I purchased it and noticed some discoloration at the bottom of the upper fuel filter housing. I didn't think too much of it while changing the fuel filter until I read a post with some information about the...

So I installed a set of gauges in my 2002 7.3 and when I snugged down the fuel pressure sending unit in the bung next to drain on the fuel filter house/bowl, it broke clean off. :doh: I couldn't believe it. When I removed the broken part from my adapter it just fell apart. I didn't even...

Hey all this Long time powerstroke owner first post on the site. I have a 95 psd manual 2wd reg cab/long bed.Have not run it all weekend it was 25 degrees out and it had not been plugged in for 2 days. Got in cranked strong ran fine went inside came outside saw major fuel leak coming from the...

I got a 1995 7.3 and my fuel line from the bowl to the left head broke. How do I get the fuel line off the driver side head? Can I do it without taking the a/c off?

Hey, my wife called me yesterday and said the truck died, I showed up, it was obviously out of fuel. It's a 2000 F-250 7.3 PSD. I added 18 gallons of fuel and replaced the fuel filter. I cycled the pump 4 or 5 times but it still wouldn't fire. I tried opening the valve on the back of the...