I’ve gone through and rebuilt some ad injectors this last weekend and for the first 5 everything went great. However, I’ve had a couple that I had to stop rebuilding completely due to the fact that some didn’t have the metal gasket that goes in between the solenoid and the metal spacer. Do you...

So I have a 2006 F-350 6.0 with a 6 speed manual. I did the high idle mod connected a switched 12V wire followed by a 10A fuse to the green wire with the purple tracer. Push the Ebrake in and flip the switch and nothing happens. My light does come on on my switch so I know my circuit is complete...

Hey everyone, I’m new to this forum and I came for some opinions from those who have had more experience with a 6.0 for a while. Recently I just purchased a 2005 f250 6.0 and right off the bat I loved this truck first couple of weeks, then my nightmare began and after cold starting my truck and...

Been dealing with this for 2 weeks. I’ve got a 2001 f250 with the 7.3 it’s been randomly turning the lights on at the cab lights and front running lights and at the license plate light. It does it when the truck is off randomly. They will stay on until the batteries are I unplugged and then...

2002 f250 w/ 7.3 EVERYTHING was working great until the motor blew New motor by Ford dealer. When I got the truck back the following problems: 1. Automatic head lights wont come on 2. Door ajar light stays on 3. 4x4 light wont come on 4. If the key is in the ignition warning bell dings- even...

Hi guys. I’m new with the 7.3 and it’s giving me fits. I tried installing a hydra tuner and ended up toasting the PCM unit. Sent the unit. Guy said it was unresponsive so he got a new one in and programmed it. Got the PCM back and installed. Check engine light off, WTS light cycles properly. My...

So I have a 2005 f350 king ranch with the 6.0 and on the instrument cluster the stock turbo gauge worked fine when I bought it. The truck had the banks 6 gun tuner in it and I was having nothing but issues with that setup. Now that’s kind of old school and has to be tapped into everything with...

This is my first post so please forgive any newbie mistakes. My problems started when I disconnected the negative cable from both batteries on my 2003F250 with the 6.0. Keys disappeared and just wanted to keep anyone from driving it off until I changed the ignition cylinder. About 3 weeks ago I...