Ford Powerstroke Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-40 of 41 Results
  1. 6.0L Problems Forum
    Hey everyone, I’m hoping someone could guide me in the right steps. I have a 2006 6.0 that started fine yesterday but this morning when I cranked over, she took a little longer than usual to startup. Yesterday, I did the blue spring update, and new fuel filters. After I installed those I forgot...
  2. Diesel Diagnostics
    I’ve had my truck an early 03, before September of 03 6.0 for a couple of months now. Everything has been working as it should. It is deleted and has a 4” turbo back straight pipe. Other than that it’s stock. A couple of days ago it started acting up. I drove it all day with no issues and made...
  3. General 6.0L Discussion
    2006 FORD F250 SUPERDUTY TURBOCHARGED 6.0L POWERSTROKE Okay so if you are having an issue with JUST FICM LOGIC POWER at 0 volts, but ficm main power 48 volt and holding strong during crank. Try this. KOEO OR KOECRANKING MAINTAINS THESE VOLTAGES. FICM VEHICLE POWER 11+ V FLP...
  4. 94-98 7.3 Motor Problems
    alright guys I just joined this forum cause I am desperate for help. So I have a 95 7.3 an starting about a month ago I would turn the key to start and nothing would happen, then after I tried it a few times it would always eventually fire up and run fine. as time went on it got more frequent...
  5. 6.0L Problems Forum
    Hey guys I'm new here so please bare with me. The truck is a 2006 6.0 F350 Lariat with a No Start. It will crank and kill batteries all day. Some smoke out of tailpipe during cranking. Truck was running fine before, except for a delayed start because of bad glow plugs.There were codes for...
  6. 6.0L Problems Forum
    2006 F350 King Ranch 6.0 powerstroke. Truck had the usual low FICM voltage cold but started everytime. Would only hesitate once or twice cold upon acceloration. No cold start issues what so ever. Started truck moved into the shop out of the rain. Removed and replaced the FICM power board with a...
  7. 99-03 7.3 Motor Problems
    Hello all, I have an 03 that has been running fine until I went to crank yesterday. I put a new exhaust system on and a boost and pyro gauge, went to crank to check for leaks and spins but no start. I have checked HPOP and I have oil, I have voltage across GPR and I checked fuses. Replaced...
  8. 99-03 7.3 Motor Problems
    Here's some back ground info on the problem. I added a bottle of "Restore" additive to the oil when I got home from work. The next morning when I started the engine nothing unusual happened, so I headed off to work. I was about 2 miles down the road when the engine suddenly stalled. I cranked...
  9. 99-03 7.3 Motor Problems
    I know I may get the oh this has been done before, but I have been looking for the past couple weeks trying to fix this and I can't find what it is. I have an early build 1999 7.3 auto with 265,000 miles. This started when I was driving to work about a month ago and the truck shut off like I had...
  10. 94-98 7.3 Motor Problems
    Hello all, I have a 1996 Ford F350 7.3 with 140,000 miles. I was driving down a gravel back road and my truck shut off in gear, its an automatic, and wouldnt restart. It had previously shut off in gear over the last year but would always restart but not this time. So i first replaced the crank...
  11. 6.0 Motor problems
    2005 F-250 6.0 Stock motor I took FICM out a few months ago when weather started getting colder due to crank/hard start, then ultimately no start issue. FICM tested between 14-30v. I resoldered FICM and installed back in truck and it tested with 48.2v. It was running great until a couple weeks...
  12. 99-03 7.3 Motor Problems
    Alright, let me start by saying that this is my first post and I have no idea if it's in the correct place or not. I just purchased a early 99 powerstroke and love it. It has a gt38r turbo, stage 1 injectors, the later model IDM, and lots of other new parts. Passed inspection no problem but...
  13. 6.0 Motor problems
    When we bought my 2004 6.0L f250 they said they had fixed everything that usualy goes wrong with a diesel. they said they did a cab off rebuild, it has 90,000 miles on it but lately it has had nothing but crank but no start issues first i replaced the fuel filter and it started right up then i...
  14. 6.0L Problems Forum
    2006 F350 6.0 Dump Body Stock except for KN Intake... HERES THE STORY: I was out plowing the other night and i put the truck in reverse, pressed the lift button on my fishstick and BANG. I hear a loud bang under my feet and my truck instantly shuts off. I put it back in park, try to restart it...
  15. 6.0 Motor problems
    New to the forum, but have probably read every single thread on this topic. Purchased 03 f240 supercab 2 months ago. Ran great no problems started it up many times. One ago I drove it into my garage to change oil pan and passenger side exhaust manifold because they were rotted out. Pulled the...
  16. Diesel Diagnostics
    I'm trying to diagnose my truck. I bought a Scangauge II and was able to get the following readings. IPR: 85% ICP: 525 FICM Main power: 48v FICM Sync: sometimes yes/sometimes no I'm thinking either a weak HPOP, or a bad o-ring somewhere. It would start to fire once or twice, but would never...
  17. 6.0 Motor problems
    Few day ago my 2003 6.0 power stroke would crank but not start. The day before the problem it started and ran fine got to work and it would crank but not start. i only have one dct that came up was a p0201. I did find that the IPR duty cycle was at 84% and only achieving 300 to 350 psi on the...
  18. Engine 911
    This is what the truck did last week. I was driving to town and lost all throttle. I put it to the floor and nothing. It was just at idle. I put in N and coasted into a side street. It died, crank no start. I changed out ICP last summer. I tested FICM 48 volts with key on and 48 while cranking...
  19. 6.0 Motor problems
    I have a 2006 F-350 4x4 with a 6.0L. I just did standpipe and dummy plugs, Upgraded the STC fitting on the HPOP and changed the IPR screen (had no junk/metal on it) and put it all back together. now when I crank it it just turns and never tries to start or even hesitate. It's obvious the starter...
  20. 6.0L Problems Forum
    I have a 04 6.0 it ran fine last night the low fuel light came on a couple miles before i made it to the gas station. got fuel an drove 15 min home an shut it off an wouldnt start the next morning. it cranks over but will not fire at all. i changed air filter an the fuel filters and still...
21-40 of 41 Results
Top