Ford Powerstroke Diesel Forum banner

crank no start

  1. General Diesel Discussion
    My 1999 7.3 ran out of oil due to dipstick adapter falling in pan, I made a new one for it so no leak anymore, once filled it made it home no problem, next day died at a stop sign had to tow her home, icp only reads 275 psi but starts on ether (yes I know it’s bad but there is a correct way to...
  2. 6.0 Motor problems
    Hey guys, new to the forum and have a question. I recently picked up a 2006 f350 with the 6.0L Powerstroke in it as a summer project, and I'm getting a crank, no start condition (cold). This is my first 6.0 so help is much appreciated! Truck/Conditions info: 2006 f350 6.0 factory head bolts...
  3. 6.0L Problems Forum
    Hi Guys, sorry for the long read it’s been a sh** show. Truck: F550 6.0 Mileage:92xxx Year: 2006 a little Over a month ago I took my truck to the Ford stealer for a oil change the next day it fired up got to my job 17 miles away and has been cranking no start since. I took it to the dealer...
  4. 6.0 Repair Help
    I just replaced the OEM oil cooler with the BPD oil cooler kit. I did not fill the valley back up to prime the HPOP. When I crank the engine ti start I read good FICM Sync, good IPR, good ICP voltage, hpop pressure started less then 500psi now its getting to 500-1000+. My question is should I...
  5. 6.0L Problems Forum
    I got a 03 f350 6.0. Just changed all the oil. Changed filters. New ipr valve, New icp. 1640psi cranking for hpop. Ficm is synced. Ipr starts at 14.7 then shoots to 50.1% but just bought from dealership. Just cranks attempts to turn over but doesn't. Injectors passed buzz test. I'm getting fuel...
  6. 99-03 7.3L Powerstroke Problems
    Just bought this beast with 200k and it was extremely hard to start and had no power. I Resealed leaking hpop, new ipr, new feed hoses with no check valves. New starter, good batteries. Installed new cps due to no tach at crank, still no tach. Wiring is good from engine harness no cps...
  7. 6.0 Motor problems
    2005 f350 ran perfect started perfect never had a hard start or stalled. now all of a sudden overnight it’s a crank no start shows code 2623 on the scanner aka ipr valve stuck in the open position. so I’ve replaced the ipr valve and now still crank no start but the code is gone ficm voltage is...
  8. 6.0L Problems Forum
    Hey guys! I’m never started a discussion before, but I do a lot of digging around here when I have issues- y’all are great! Here’s my issue/background : 135k - have had injectors done, fuel tank, erg delete, oil cooler, ficm updated For the last 3-4 years, the truck has had a “hard start”...
  9. General 6.0L Discussion
    I need all of the Big Brains on this one. Here’s the problem. I just finished rebuilding my 6.0L. Won’t start. I’m not getting hpop pressure. known screw ups are: Primed/cleaned hpop pump in a bucket of clean oil. Good output w/drill running pump. Installed pump onto engine. That was about a...
  10. General 6.0L Discussion
    Over the past 2 weeks my truck had been getting harder and harder to start. It used to start no matter the weather within 2 cranks. It slowly started getting worse 3 cranks, 4, 5, then 10 full rotations, stop and start again. And it would fire. Walked out this morning and it cranked until the...
  11. 6.0L Problems Forum
    Hey everyone, I’m hoping someone could guide me in the right steps. I have a 2006 6.0 that started fine yesterday but this morning when I cranked over, she took a little longer than usual to startup. Yesterday, I did the blue spring update, and new fuel filters. After I installed those I forgot...
  12. Diesel Diagnostics
    I’ve had my truck an early 03, before September of 03 6.0 for a couple of months now. Everything has been working as it should. It is deleted and has a 4” turbo back straight pipe. Other than that it’s stock. A couple of days ago it started acting up. I drove it all day with no issues and made...
  13. General 6.0L Discussion
    2006 FORD F250 SUPERDUTY TURBOCHARGED 6.0L POWERSTROKE Okay so if you are having an issue with JUST FICM LOGIC POWER at 0 volts, but ficm main power 48 volt and holding strong during crank. Try this. KOEO OR KOECRANKING MAINTAINS THESE VOLTAGES. FICM VEHICLE POWER 11+ V FLP...
  14. 94-98 7.3 Motor Problems
    alright guys I just joined this forum cause I am desperate for help. So I have a 95 7.3 an starting about a month ago I would turn the key to start and nothing would happen, then after I tried it a few times it would always eventually fire up and run fine. as time went on it got more frequent...
  15. 6.0L Problems Forum
    Hey guys I'm new here so please bare with me. The truck is a 2006 6.0 F350 Lariat with a No Start. It will crank and kill batteries all day. Some smoke out of tailpipe during cranking. Truck was running fine before, except for a delayed start because of bad glow plugs.There were codes for...
  16. 6.0L Problems Forum
    2006 F350 King Ranch 6.0 powerstroke. Truck had the usual low FICM voltage cold but started everytime. Would only hesitate once or twice cold upon acceloration. No cold start issues what so ever. Started truck moved into the shop out of the rain. Removed and replaced the FICM power board with a...
  17. 99-03 7.3 Motor Problems
    Hello all, I have an 03 that has been running fine until I went to crank yesterday. I put a new exhaust system on and a boost and pyro gauge, went to crank to check for leaks and spins but no start. I have checked HPOP and I have oil, I have voltage across GPR and I checked fuses. Replaced...
  18. 99-03 7.3 Motor Problems
    Here's some back ground info on the problem. I added a bottle of "Restore" additive to the oil when I got home from work. The next morning when I started the engine nothing unusual happened, so I headed off to work. I was about 2 miles down the road when the engine suddenly stalled. I cranked...
  19. 99-03 7.3 Motor Problems
    I know I may get the oh this has been done before, but I have been looking for the past couple weeks trying to fix this and I can't find what it is. I have an early build 1999 7.3 auto with 265,000 miles. This started when I was driving to work about a month ago and the truck shut off like I had...
  20. 94-98 7.3 Motor Problems
    Hello all, I have a 1996 Ford F350 7.3 with 140,000 miles. I was driving down a gravel back road and my truck shut off in gear, its an automatic, and wouldnt restart. It had previously shut off in gear over the last year but would always restart but not this time. So i first replaced the crank...
Top