coolant filter

Hi folks, I recently bought a 2003 F-250 Super-Duty 6.0L 2WD regular cab with only 51k miles and am working to bulletproof it so it will last a long time. I have some experience working on big machines, although not much working on vehicles yet. As warm-up to bigger projects, I've done a few...

Well, it has been abut 4 years since I had my HGs and oil cooler work done, and now my deltas are running about 15-25 degrees, unloaded, depending on speed (20-25 at 65-70mph). So I am thinking about installing BPD's oil cooler relocation kit (myself) and was thinking about installing this...

FS: 6.0 Coolant Bypass Filtration System - SOLD For sale is one coolant bypass filtration system. Works fine. It is unbranded, but began its life as a Dieselsite unit. The bracket is modded to hang on the stud next to the rad on the pass side. You just need to add two hose clamps for the...

Just wondering what others think about IPR Research Coolant filter. Just had new Oil Cooler and EGR Delete done and want to put a coolant filter on. What do you think about this one and what made you choose the one you may have chosen?

Let me start off by saying this... Yes, I know that I do not have a huge post count and I am not very active on the forum. With that being said, I have searched this forum extensively and it has proven to be an extremely valuable tool which has been very helpful with my 6.0 endeavors! I have...

Hi guys (and gals) I am new to the forum. Thanks for all you do for average guys like me. I have more than 40 years of doing everything on my personal cars and race cars. This is my first diesel and I am about ready to “home run” this 2006 6.0. I have been watching things with Scangauge II...

Yep, finally did it! I've been trying to find some time and yesterday was it. Got it installed, so what did I think? Well designed, easy install, and the small hose clamps are way too dang big. Disappointed by that (They did leak, even fully tightened) - so tomorrow morning I'm running to...

So I've heard everything about it being a must to put a coolant filter in your 6.0L PS because they plug the oil cooler... So i'm at the stages of flushing my truck's system and most likely changing out my oil cooler as I have 180k km on the truck i just bought. What i'd like to know is where...

Okay, I plan to keep my 6.0 as boringly stock as possible, but I am not above adding mods like a coolant filter, bypass oil filter, ScanGauge, or other non-invasive items that could help me avoid the more common problems. I have the ScanGauge and just added the Sinister CFS, but I am wondering...

So, what coolant filter kits are people running? I am going to flush my coolant soon and would like to go ahead and install one of these while I'm at it. Anyone have any recommendations on coolant? Rotella ELC or just use the factory Ford stuff?

-5 coolant filters (4 fleetguard wf2077, 1 baldwin b5134) -5 fuel filter kit (both filters and o rings included in each kit, total of 10 filters. 4 kits are fleetguard and one is motorcraft) -8 fleetguard oil filters (comes with o rings) Sold my truck and cleaning out the garage Valued around...

I just bought this truck and I was wondering if the upgraded sct fitting, and the upgraded oil feed lineand drain tube are already on my truck. Also, it looks like there is a coolant filter on the truck already from the factory.

I wanted to share my oil bypass and coolant filter setup with those guys running a Banks intercooler, because the boost pipe coming off the turbo takes up a lot of available space for this install. I contacted Scott Richards about using his kit that he sells on dieseloilbypasskits.com. He said...

Got a quick coolant flush question for ya: After installing a Bulletproof EGR delete and new oil cooler, I flushed the coolant system with Fleetguard Restore and VC-9. Since then, I've flushed it 6 times with distilled water (approx 4 gals per flush, up to the full mark on the sticker) but when...

Ok, I purchased a sinister coolant filter awaiting install when I flush the gold crap out and put the nice red ELC stuff. I also picked up a BD CCV kit. I would definitely like to add a bypass filtration kit too. Im scratching my head wondering where all this costly [email protected] will go. Any advice...

Ive tried searching but didnt find what i was looking for. anyhow i wanted to know what kit is recommended and what is the benifit of using one?

DieselSite coolant filter kit for sale. I bought one and then got another at Christmas as a gift. It's brand new, in box. $120 shipped

The filter has been on for 2,997 miles. Full of gunk. Im going to run a couple more filters before I flush my coolant.

I'm looking at either a sinister coolant filter or dieselsite coolant filter. which one is better? they are both about the same price the only thing is, the sinister one looks better. other than that, is there anything different between the two? thanks!