Ford Powerstroke Diesel Forum banner
contribution
1-6 of 6 Results
  1. 6.0L Problems Forum
    Hello, this is my first post. I have an 03 6.0L with 290k miles. I recently had an issue where the truck was idling like ****, lost power, wouldn't really go into boost. A very long story short, I only had 32psi fuel pressure, so the fuel filter housing, all o-rings, and OEM blue spring mod...
  2. 6.0 Motor problems
    I keep getting a cylinder 5 contribution/balance code that will come right back as soon as I clear it. But if I turn the truck off, clear the code, and turn it right back on it won't come back for the rest of the drive. The idle is a little rough when I have the code but not too bad and runs...
  3. E-Series Van Discussion
    Does any one know if there is an Ipad based scanner that will let me do a buzz test or contribution test? I hava a passenger E350 that I would like to know what is going on. Besides the test above I would like to set up a dash board with some instaments that are not in my cluster.
  4. 6.0 Motor problems
    ive had a p0278 for a while now, which is cylinder 6 contribution code: Diag preformed: using ford ids -powerbalance- cylinder 6 only drops out slightly (not even -20) on a hot engine only while in gear at a dead stop.( rpm raised to 900 while power braking power balance smooths out...
  5. 94-98 7.3 Motor Problems
    Well boy's im in need of some help again.My truck has been (running off) kinda stumbling when i am driving. Got a buzz test done and good news is all past the test. Did the cylinder contribution test and not good news. Cyliners 3,4,and 7 are not helping the motor run (failed the test). The truck...
  6. 6.0L Problems Forum
    my truck has been having an issue for a little while now, if the truck is warm it always is pefect at cold the truck will shutter and run like sh**. i originally thought maybe it was ficm but could be wrong. i drove it cold to my buddies shop. as soon as we plugged it in to do contribution test...
1-6 of 6 Results
Top