Ford Powerstroke Diesel Forum banner

compressor

  1. General 6.7 Discussion (2017-2019)
    Q1: 2019 f250 platinum 6.7 tow hooks on the front. What amount of torque are these rated at. Same for rear tow chain eyelets. Q2: any recommendations on an air horn to connect to upfitter switch and good place to mount compressor and horns. Thanks
  2. 911 Urgent Situations
    AC worked for about 5 minutes then goes to hot. When it turns hot the clutch no longer engages. Waited a long time and still no AC. Checked freon and level is good. Orphis tube? Clutch and Compressor? I also checked relays and fuses...they are good. Frustrated and HOT! Any help appreciated.
  3. General 6.0L Discussion
    I'm looking for an air compressor powered adjustable torque wrench, possibly two. I just want to connect my compressor to a wrench that provides an audible tone when torque settings are reached. This would be for everything from working on heavy torque bolts like on brakes, to lug nuts, to small...
  4. 99-03 7.3L General Discussion
    We had a couple of warmer days and I noticed my A/C was working intermittently. It works at idle, but any rpm up to 2K and it will start cycling on and off every 5-7sec. At 2k it will stay running longer up to 2 min before it cycles as long as the fan is on high and the A/C is set to max. I...
  5. 99-03 Ford Excursion Forum
    had the compressor go out at about 256k. it was probably the best A/C in any vehicle ive ever driven. replaced compressor with re-manufactured one and a brand new drier. compressor was bad. next bought a brand new one from advance and replaced expansion valve. the brand new compressor is...
  6. 6.7 Problems Forum (2011-2016)
    So I have an issue w/ my 2011 6.7 King Ranch. Truck has been deleted (dpf and egr) which is apparently a pain in the a** when you take it to a ford dealer. Compressor is constantly cycling, comes on for about 2 seconds than cuts off. I have taken it to 2 ford dealers and a local mechanic and I...
  7. 99-03 7.3L Performance Parts
    I bought a riffraff wheel from dyno proven (riffraff was out of stock) and it shows the marking bdpaf7.3 on the back and on the stud on the front of it. Did they send me bdp's wheel by mistake? Thanks!
  8. 99-03 7.3L Performance Parts
    I was just on FTE diesels website and saw a Batmo wheel for a 7.3, never saw one before. Are they any good? Better than a WW2? Thanks!
  9. The Swap Meet
    I have a pair of Mack truck horns that came off a Mack fire truck. They are in good condition and clean up nice. Very loud and sound nice. I would like to trade for a 12 volt air compressor. Max PSI 150. I also have a 2010 f250 style chrome grill if you would rather trade for that. The grill...
  10. 99-03 7.3L Performance Parts
    Does anyone have an early 99 compressor wheel in their truck? Im selling an early 99 turbo, and I was considering swapping the wheel with my 01, and put the 01 wheel in the early 99 turbo. Will this work and is it worth the time?
  11. 99-03 7.3L General Discussion
    You’ll have to bear with me as I’m trying to diagnose the problem from the information I’m getting from my wife since I’m currently deployed. I had never noticed any sort of turbo surge problems with my truck but then again I had never towed any loads with it. When towing my Suzuki Samurai...
Top