Ford Powerstroke Diesel Forum banner
cam sensor
1-9 of 9 Results
  1. 99-03 7.3L Powerstroke Problems
    I haven't posted in a while as my truck has been purring like a kitten. In fact, it was purring like a kitten at 75mph down the highway the other day (and I said, man, this thing is running GREAT!), seconds later, it coughed, sputtered, then ran again, then coughed, sputtered, ran, then died as...
  2. 99-03 7.3 Motor Problems
    Hey guys, my 2002 f250 4x4 superduty recently started dying either while coming up to a stop or soon after taking off from a stop. It is VERY intermittent, l have only gotten one code which was a P0340 code. I have put 2 new ford Cam Position Sensors in it, and it still dies. I drove around for...
  3. 6.4L Problems Forum
    A coming oil leak on the 6.4L comes from the o-rings not sealing properly on the camshaft positioning sensor. I have replaced the o-rings two times using OEM ford replacement part with no luck. First time it sealed for about 4-5 months then started leaking again. Bought another set and only...
  4. Introductions
    I am one of those newbies that registers and asks questions until I find the solution I need then I will likely never be seen again because I am no expert, in fact not much of a mechanic. I need help with two things 1. What does the uninstall of a vin locked superchip require? I bought the...
  5. Engine 911
    Drove my 02 F350 Lariat 7.3 to get some diesel this morning and it wouldn't start after fueling. It's been running like a champ since I bought it three years ago. Here are the symptoms: - Engine will turn over (strong), but will not start - "Wait to start" light won't go off - My tuner wants...
  6. 94-98 7.3 Motor Problems
    Truck won't start. Replaced broken plunger pump.replaced cam sensor. Truck turns over w/o smoke. Don't know what's next
  7. 99-03 7.3 Motor Problems
    Well I've got an interesting one here for the forum. I'm not really new to these wonderful engines, have been a proud owner and curser/fixer since '07. However, I have a 99 7.3 that has no power and will die then restart instantly when outside temp is below freezing, it will improve when...
  8. Engine 911
    I'm having problems with the truck dying while im driving then when i go to start it again no wait to start light and it will crank but not start. My cousin had the problem with the fuel heater grounding out and causing the truck to shut off but he removed the fuel heater. Ford informed me that...
  9. 6.0 Motor problems
    My 2004 6.0L started missing under load, blowing smoke only when it missed. It was ok if I went real easy on it but if I tried to take off normal, it would miss. I pulled codes and got P0336 and P0341. I know that this is the crank sensor and cam sensor. I assume both didn't go bad...
1-9 of 9 Results
Top