Ford Powerstroke Diesel Forum banner
buzz test
1-6 of 6 Results
  1. 94-98 7.3L Problem Forum
    I have an old farm truck im trying to get running after it has sat for a few years. Ive been using this flow chart to try and find out the problem. https://cpaddict.com/content/7.3nostartchart.pdf Everything on this list I have personally checked and/or replaced and its working how it should...
  2. 99-03 7.3L Powerstroke Problems
    After replacing the injectors today I still have a code and am hoping someone will kindly help to guide me in the right direction by lending their experience and insights. Original Codes: and P1293 (High Side Open Bank 1) and P0273 (#5 injector circuit low) Initial Problem: Rough idle and...
  3. 6.0 Motor problems
    Hey guys I have a 07 with 196k. With a new stc fitting and ipr valve, Full synthetic oil and new coolant. Ever since we got the truck its had the P0279 Code, we were able to do the buzz test and found out there was no buzz at all coming from injector 7 what could this mean? Bad wires? Hopefully...
  4. E-Series Van Discussion
    Does any one know if there is an Ipad based scanner that will let me do a buzz test or contribution test? I hava a passenger E350 that I would like to know what is going on. Besides the test above I would like to set up a dash board with some instaments that are not in my cluster.
  5. 94-98 7.3 Motor Problems
    In need of help again guys... Truck has been running ruff,lack of power,missing,just different. I have replaced icp, cps(3 times),and tested all injector ports on valve cover plugs with ohm meter.all checked out good. Had my dad bring home scanner passed buzz test then I did a cylinder...
  6. 94-98 7.3 Motor Problems
    Well boy's im in need of some help again.My truck has been (running off) kinda stumbling when i am driving. Got a buzz test done and good news is all past the test. Did the cylinder contribution test and not good news. Cyliners 3,4,and 7 are not helping the motor run (failed the test). The truck...
1-6 of 6 Results
Top