Ford Powerstroke Diesel Forum banner

arp head studs

  1. General 6.0L Discussion
    Hi, Any recommendations on a trustworthy shop to do heads on a 2003 Ford 6.0? I expect I need the heads resurfaced, new gasket, and head studs. I plan to test my coolant pressure under load after seeing coolant pool around cap. I thought about replacing the original degas bottle but if the...
  2. 6.0L Problems Forum
    just found out that my truck is backfiring into the intake what could cause this problem just did head studs and headgaskets and blue spring upgrade kit it ran with about half a miss for about 10 min then started popping back into intake ?? Any help
  3. 6.0L Performance Parts Discussion
    I'm going to start buying all the parts I need to bulletproof my 2007 6.0. I will be doing the entire install myself and with the help of my brother. I've created a list that I think includes everything I will need for the project. There is a few parts that I'm uncertain which I should go...
  4. 6.0L Problems Forum
    Hi all. I'm about to dig into my passenger side #5 of my 2003 to look for push-rod/rocker problems that I believe has led to losing compression through the intake following HG repair. Once I do loosen that head stud, assuming I do find the issue and don't have to pull the head, my preference...
  5. 6.4L Performance Parts Discussion
    Just wondering if anybody has had any problems after doing the studs in cab, one by one with out replacing gaskets? I'm thinking about doing it, I've just never heard anything on this before.
  6. 6.4L Performance Parts Discussion
    Im looking to do my head studs on my 08. I've heard that you can do it 1 by 1. I don't have a garage to pull the cab and trying to figure out how to go about doing this. anyone have any idea?? :toofless:
  7. 6.0 Motor problems
    Hey fellas. I am a new diesel owner looking for some help with a head gasket complication. The truck is a 2003 F350 with a 6.0. I am doing a little refresh job, new egr cooler, oil cooler, head gaskets and arp studs. I had the heads cut because they had a warp in them and ran into a problem...
  8. 6.7 Motor Problems (2011-2016)
    Hey fellas. I am a new diesel owner looking for some help with a head gasket complication. The truck is a 2003 F350 with a 6.0. I am doing a little refresh job, new egr cooler, oil cooler, head gaskets and arp studs. I had the heads cut because they had a warp in them and ran into a problem...
  9. General 6.0L Discussion
    2005 X Black Limited 120k. Time for the studs, and all motor updates. A few new injectors, OEM head gaskets, ARP 250-4202, STC fitting upgrade, blue spring kit, 6.4L banjos, inspect oil cooler (was done already), clean turbo, turbo updates, IPR GEN 2 Egr delete, and a host of other misc stuff...
  10. 6.0L Problems Forum
    I just purchased my first diesel truck, and looove it. I bought the truck knowing about the issues with the oil cooler and EGR cooler failures. I am ready to go ahead and solve those problems before they cause a very costly headgasket job. The question is, after the coolant flush and ELC change...
Top