Ford Powerstroke Diesel Forum banner
7.3 2001
1-7 of 7 Results
  1. 99-03 7.3L Powerstroke Problems
    I looked for a similar post and could find one, so I apologize if I am basically reposting. I just put 200cc/30% injectors from rosewood diesel in my truck, along with ARP head studs, CNCfab 4 line feed, bellowed up pipes, new under valve cover gaskets. It took me a few weeks, but I finished up...
  2. 99-03 7.3 Motor Problems
    Have a 2001 7.3 installed all new glow plugs, relay, harness and it was starting amazing sat for 3 weeks went to fire it up and it needed ether and about 20 minutes of cranking to go. Ran like crap till I started it 3 days in a row and drove it a few miles. Now it runs like new but same issue 3...
  3. 99-03 7.3 Transmission Problems
    So I’m new and not the brightest. So have some patience SUBJECT ——2001–7.3 4x4 F550 auto 4r100 trans. problem with switch on dash not working at all, the light in switch does come on. The rpms don’t ramp up, actually never Have even when it worked rite. HOW I FORCE IT. — put transfercase in...
  4. 99-03 7.3L Powerstroke Problems
    Bought my first diesel and it’s a 7.3 f350. With new ventures came new problems. This is the first I’m hearing of a vehicle needing a frame alignment. With this new truck I got a wheel alignment done and was told the toe is off center. No accident history and no salvage title so I hope this is...
  5. 99-03 7.3L Powerstroke Problems
    Hello, I currently have a 2001 f250 7.3 power stroke 2wd. The truck has about 399500 miles on it and we just rebuilt the turbo and replaced the up pipes and put a new pedestal on it. The truck has more power when it gets up to 3000rpm in second and 3rd gear. First gear is super slow and I was...
  6. Suspension & Steering
    I have a 2001 F-350 7.3 XLT 22x,xxx Mi. I recently broke the mounting bolt to my steering gear box and I swapped that out! From there, I noticed my tires were chopped and they needed balanced & rotated(tech said rim may be bent had a hard time balancing), still wandered....from there I replaced...
  7. 99-03 7.3L General Discussion
    Hey guys I have a PMT-3 DPC-422 PCM What so special about it that makes replacing it so expensive? If you have any information on this pcm it'd be greatly appreciated.
1-7 of 7 Results
Top