Search Results for ‘7.3 1999’

Anyone know what the ICP, IPR, & MAT are suppose to read? These are at idle & operating temp. Truck still throwing p1211 & p1210 codes. I have replaced the ICP & MAT sensors, but not the IPR. Please help. I’m new to the Forscan Lite app. Brand new injectors & tested. Also new injector harness.

I just bought a 99 7.3 power stroke. The guy before me kept a detailed list of everything done to it and on that list is what he called a 800 hp built automatic transmission with it own separate cooler, that’s mounted in the front of the radiator. Well knowing this I bout a ct3 screen to...

Okay so very new to 7.3’s, and recently had a fuel leak off fuel bowl valve. Replaced that and then fuel bowl wouldn’t fill, found blown fuse. Now truck runs extremely rough and threw a code for icp, had a spare when bought truck and slapped that on and absolutely no change. Any help is...

Bought truck and guy said it needed injectors. He said his mechanic tested them and the passenger back two injectors were bad. Truck has around 230k and it was running rough. I bought a set of used tested injectors online (all I could afford) and installed them. Also did glow plugs and valve...

I have a 1999 7.3 powerstroke and if I cycle the key like 5 times it’ll build up enough pressure to start then it’ll idle rough and blows out enough white smoke to fill the neighborhood then it’ll bog down and die And the fuel bowl has so much pressure you can open it and it’ll try to spit fuel...

I need help with picking the right torque converter for a automatic 4r100. I have a 99-f250-7.3. It has K&N intake and Edge tuner with silverline exhaust and upgraded Mishimoto tranny cooler. When i had my tranny rebuilt i asked they put the same triple clutch torque converter. After pulling my...

I have a 1999.5 7.3 and it won't rev very high and is down on power. I apologize for the long story but this one has a lot to it. Recently I bought a used/rebuilt turbo with a wicked wheel in it. After installing it, the truck blew out the EBPV actuator seal. It would rev just fine it was just...

1999.5 f250 7.3L Had massive oil leak probably 16in diameter in 10 mins after shutting off. Valley completely full leaking down threw to oil pan. Basically fresh undercoated the truck lol.Just replace turbo pedestal O rings top and lower. Leak isn’t as bad but valley is full so I’m...

I have an e99 7.3 powerstroke that has been giving me trouble for quite some time now. My issue is when I start my truck it smokes a lot but then when Its all warmed up and on the highway there’s no smoke... but wait there’s more when I come to a stop sign or Traffic light it starts it again. So...