Ford Powerstroke Diesel Forum banner

6.0l

  1. 6.0L Problems Forum
    I twisted the fuel supply line while doing an oil cooler job on an early '04 6.0L F350 SuperDuty. Backup wrench slipped when I finally broke the fitting loose that Hercules had torqued down. This line does NOT have the banjo bolts that the newer '04 and up have. OEM part is 3C3Z-9B-273AA...
  2. 6.0L Problems Forum
    Recently got new heads and bulletproof kit on the 6.0....but more oil is leaking than just the typical bell housing. On the driver side cylinder 8 and 4, i think, are leaking from the bolt on the exhaust manifold. Took it back to the shop, they said no worries its residual and pressure washed it...
  3. General 6.0L Discussion
    Does anyone know where I might find a set of transmission line adapters/reducers for the radiator involving the Torqueshift, 5r110w transmission? It is the ‘04, threaded line.
  4. 6.0L Problems Forum
    Hi everyone I am new to the forum. My Problem is a P0299 CEL, the only symptom is P0299 CEL I get a good boost (WOT Uphill 22-24psi) EBP read 14.8 at idle Baro reads 14.5 at idle My Truck: 2005 Powerstroke 6.0 L F-350 XLT - Super Duty - Supercab ~160K miles Recent repairs: Water pump...
  5. General 6.0L Discussion
    So I'm looking at two trucks... First is an '08 F350 with 189,600 miles on it for $18,000. Tons of upgrades: -6" engineered lift (done at 125,000 mi) -King shocks and fox racing shocks in rear with air bags -Head gasket and studs done at 155,000 mi (ARP Studded heads) -Egr/dpf delete...
  6. 6.0L Problems Forum
    My truck randomly lost all power and went to idle four times in a matter of 10-15 minutes this morning. When you hit the accelerator it does nothing. I have to shut the truck off and restart in order to "reset" whatever is happening. After the fourth time doing this it ran fine for another 20...
  7. AccurateDiesel.com
    Turn old greasy grimy parts collecting dust under your workbench into cold hard cash! We are buying 6.0L Powerstroke injector cores - $25 each! Send us an email or give us a call and let us know how many you have! Tech Tip of the week: You can use the cash from your cores to buy more cool...
  8. 6.0 Tech Files
    Hi All... First off, I tried to put this in the Tech section, but it wouldn't let me. I think that TSBs are pretty handy but they seem to be scattered all over hell's half acre. I have gathered the most relevant ones for my truck and thought that I would throw them up in case anyone else ever...
  9. General 6.0L Discussion
    Hey guys, I've been a member of the site since I purchased my 2004 F-350 6.0L back in June. The expertise here is amazing, and its so awesome to see the community step up to help each other. Anyways, after reading through Paramedic Saves 6.0L and watching I'm getting ready to replace my own...
  10. 6.0L Problems Forum
    I have a 2006 stock 6.0L. When I am at a stoplight, there is a vibration, humming coming from the engine area that sounds like a foghorn. It clears up with acceleration. Is that the IAC valve or PCV valve? I have searched and cannot get a clear answer. Thanks for the help!:tard:
  11. 6.0 Motor problems
    I just purchased this truck a month ago and am having issues with the lack of power. This is my first 6.0 so I am looking for some advice. I hooked the truck to my AE and ran some test and got the following results. I am going to pull teh EGR valve tonight and see what it looks like...
  12. 6.0L Performance Parts Discussion
    Hey guys, I just purchased my first powerstroke a few weeks ago and it is time to start modding her up. At the moment, it is completely stock. I am looking for a few recommendations about the best sounding, healthiest exhaust kits for the 6.0L. Thanks guys, Brian
  13. 6.0 Motor problems
    Okay back again and have done a lot of work since last post but still won't start. So far this is what has been done: New stand pipe and dummy plugs STC fitting (upgrade) New Cam and Crank sensor New HPOP New Low pressure oil pump New (8) fuel injector New ICP and IPR New FICM New Batteries New...
  14. 6.0L Electronics Discussion
    Good morning to all I have a 2006 F360 6.0L. The battery light is flickering. Off most of the time, they comes on a a moment or two then off. Everything checks out. The batteries are about a year old, at 12.5 volts each. Passed load test. The alternator is new, show 14.1v at the alt...
  15. 6.0 Motor problems
    I have a 06 f350 with a 6.0l enough said rite but I am trying to get it running. I took it to the dealer with white smoke and slow at getting up to speed they said it was the egr cooler agian. So i had it towed home to do it my self I ordered a sinster egr cooler kit and i put in a new oil...
  16. 6.0L Problems Forum
    Hi there I recently bought an 05 6.0l and have been having some engine issues. The truck seems to start kinda rough and has a slight miss every once and a while. It also has recently started to smoke when the truck is cold. Once the truck has warmed up the smoke seems to disappear and the truck...
  17. General 6.0L Discussion
    Hey all, This is my first post on POWERSTROKE and it starts with a question. I am new to the big truck realm and ended up buying a 05 f250 king ranch 6.0l. It has the delete, IPR remote oil and coolant filter, arp head studs, SCT x3 innovativeD's custom tunes, and edge Insight, procomp 4 in...
  18. Engine 911
    I have a 2005 F350 6.0L with 275k miles on it. I have had a ton of work done to this truck and I'm ready to send it to the scrap yard! The most recent work was all eight injectors and the FICM were replaced about two months ago. Recently, I stopped at a stop light and at an idle the oil...
  19. 6.0L Problems Forum
    My 2005 F-350 has had issues with putting a load behind it lately. If I have at least 5000lbs or more behind me and I get on a hard pull up a hill the truck will put itself in a limp mode, light comes on and it wont build over 12lbs of boost. A friend of mine hooked his diagnostic tool up to it...
  20. 6.0L Exterior Discussion
    Hey there fellow PS'ers. I took a stab at the grill mod myself instead buying one and going that route. Turns out that it costs about $22.00 rather than buying a grille or grille insert. Here are the pics of the progress. Enjoy :) Here is the original that I was working with. A little too...
Top