I have a pretty serious situation, I was removing my HPOP and dropped a socket and extension down into the spot where the pump sits. It fell down between the block and the gear on the end of the camshaft that drives the pump. any suggestions on what I should do? Tried using phone camera to look...
My 2006 f-350 6.0 with 101,000 miles only cranks and will not start.
Here's where i'm at and the trouble shooting I've done.
1. Checked oil level.
Result: oil level ok
2. Drained diesel from primary and secondary filter housings to check for water. (there was no "water in fuel" notice.)