Ford Powerstroke Diesel Forum banner

6.0 died

  1. 06 running rough after dying on highway

    6.0 Motor problems
    I've had this 2006 F250 since 2010 and I've put 75K on it since purchase with very little issues. I'm a contractor and the truck has been used as a daily driver as well as a tow rig to move equipment to sites. Recently the truck hasn't been used nearly as much. I've been doing some work out...
  2. Truck shuts off when cold ICP unplugged helps

    6.0 Motor problems
    I have a 2004 ford f350 i did the egr delete on it and after it i started and it ran perfectly fine for a good 20 seconds then it shut off. but it will start right back up everytime. If i start it and rev it up to 1500-2000 RPM's it will stay running. i did the wiggle test and that did nothing...
  3. 6.0 won't even crank at this point

    Engine 911
    So I'm new to diesel, and have had some work on this engine, which is at 130k miles. I was driving on the freeway the other night when it just lost power and died. It would crank and run off the starter, throwing a TBC fault on the dash. After getting a tow home, my brother had it running, but...
  4. Need help No start on work truck been down a week already

    Engine 911
    I have a 2006 Ford F350. It has 102,000 miles in it. It is studded, erg delete, cold air intake, 4in exhaust, sct w/ extreme x, and a powermax turbo. Drove the truck home sunday night from Tampa for 2 hours came home and let it cool down 5 mins before shutting down. The next morning I go to...

    Engine 911
    Just bought an 04 F250 6.0, drove it off the lot, everything was good, I was running around town doing some errands and I realized my foot was on the pedal and my engine was just idoling, rolled a little bit, engine cut off, got it pulled into a parking lot and towed to my apartment, it will...
  6. 6.0 fuel pump. hfcm

    General 6.0L Discussion
    I am having issues with my pump I think. I bought a new one to put on. But when I was checking everything before I started working on it I wanted to see if I was getting fuel to the filter at the motor and I was. I was just wondering if this means that the pump isnt bad or whats causing my...
  7. Please Help 04 6.0 no oil pressure!HELP

    6.0 Motor problems
    How do I test the low pressure oil side of the 6.0, i seem to have no oil pressure at all...:dunno:
  8. HELP 6.0 died due to bad needle bearing roller lifter / getting reman from ford

    6.0 Motor problems
    I'm at a ford dealer and they have pulled the LPOP off and it was all chewed up and they drained the oil and lots of metal pieces in it. They are tearing the engine down in the next day or so to be 100% sure but all the techs say it's the needle bearing and I'll need a new engine. I guess...