Ford Powerstroke Diesel Forum banner
Cancel
94.5-98.5 7.3L CNC Fab 4-Line Feed Fuel Line Kit - 42201X

94.5-98.5 7.3L CNC Fab 4-Line Feed Fuel Line Kit - 42201X

Be the first to review this product
$395 USD
TRUCK YEARS: 1994.5-Early 99 ENGINE TYPE: 7.3L Meant for installation with factory or aftermarket drop-in style turbos to convert to an E-fuel system High quality billet T-6061 aluminum machined in house Upgraded with aerospace/military grade high flow Genuine Brennan™ compression fittings Eliminates many leak points from the stock factory fuel pump and fuel bowl Base plate and distribution manifold are pre-assembled for easier installation All lines are made of mandrel bent 304 Sandvik Coromat seamless stainless steel tubing Every single kit is test fit during production to ensure perfect fitment Comes with all necessary fittings, o-rings for turbo pedestal, bolts, and freeze plug for a complete install. Test port to measure/set fuel pressure 1/2" AN (-08) inlet for plenty of volume of fuel for unlimited size injectors Lines are bent right here in our shop on our state of the art 3 axis CNC tubing bender for a perfect fit every time **NOTE: The 99-03 7.3L line kits look much nicer installed with this fuel line kit with the factory bowl and pump eliminated. This kit works great from stock 90cc/0 injectors to how ever large you want to run. It is a kit that is for the DIY person wanting to convert their truck to an electric fuel pump system. Pump, regulator, and filters will need to be purchased. There are quite a few other shops that build quality fuel pump/filter/regulator kits that will work great with this fuel line kit. All you need is some 1/2" 100psi minimum fuel rated hose/line from the customer supplied pump assembly up to the fuel distribution block, and your good to go. You can also build your own pump setup if you like. We recommend using a stock Superduty Bosch pump for stock to 160/30 injectors, the AEM 400lph pump for mild built trucks for above 160/30 to 250/100 injectors, or the Fuelab Prodigy pumps for competition trucks running 300cc or larger, and we also recommend using Fuelab adjustable regulators. For a more plug-n-play type fuel pump/filter setup we recommend the AirDog II 5G Fuel Pump as it has the filters and regulator built in, a lifetime warranty (as long as you turn in your receipt within 30 days of purchase), and is simple to install as all the legwork for finding fittings/adapters comes with the AirDog kit. The only thing you need to do with the AirDog II 5G with an OBS is to cut off the "mini fuse tap" wire that is meant for the 99 and newer trucks to an "ATO (regular) fuse tap" for key-on power to send power to the supplied relay, and install the pump as directed by AirDog. Click on the "Documents" tab above to download the installation instructions IS RECOMMENDED THAT YOU USE LOCTITE 545 ON THE PIPE THREADED FITTINGS DURING INSTALL OR GAS (NG OR PROPANE) RATED TEFLON BASE PASTE. OR IF YOU ARE VERY CAREFUL, YOU CAN USE TEFLON TAPE AS LONG AS IT IS ALSO RATED FOR GAS. IT IS CRITICAL YOU DO NOT GET ANY TAPE INTO THE FUEL SYSTEM DURING INSTALL **Looking to bundle and save? Check out this LINK!

Forum Discussions about this Product

1 - 2 of 2 Posts
  1. N

    Efuel

    12
    3K
     by NWILEY55
    1. Corey@CNCFAB

      · Vendor
      Joined
      ·
      13,828 Posts
      #5 ·
      NWILEY55 said:
      Are you running one?
      Click to expand...
      This is the kit he installed on his truck.

      There are no cons to running an efuel setup. It's a significantly cleaner setup in the valley, gets rid of dozens of leak points.

      7.3-OBSE99-VMFK

      Upgrade your 94.5-98.5 7.3L Powerstroke fuel system with our 4 line feed fuel line kit designed to eliminate many of the infamous leaks from the mechanical fuel pump and the stock fuel bowl.
      cncfab.us cncfab.us



      Sent from my Pixel 4 XL using Tapatalk
       
    2. N

      · Registered
      Joined
      ·
      36 Posts
      Discussion Starter · #6 ·
      [email protected] said:
      This is the kit he installed on his truck.

      There are no cons to running an efuel setup. It's a significantly cleaner setup in the valley, gets rid of dozens of leak points.

      7.3-OBSE99-VMFK

      Upgrade your 94.5-98.5 7.3L Powerstroke fuel system with our 4 line feed fuel line kit designed to eliminate many of the infamous leaks from the mechanical fuel pump and the stock fuel bowl.
      cncfab.us cncfab.us



      Sent from my Pixel 4 XL using Tapatalk
      Click to expand...
      I've looked at your kit and I really like the way it looks but what do you do for a fuel pump and filter set up?
       
1 - 2 of 2 Posts

Forum Reviews

Be the first to review this product

Write a Review

Do you have experience with this item? Help our community members and share your knowledge.

Sign in to add review

Ford Powerstroke Diesel Forum Since 2005
A forum community dedicated to Ford F-series owners and enthusiasts with a Power Stroke diesel engine. Come join the discussion about performance, bulletproofing, modifications, classifieds, troubleshooting, maintenance, and more!
Show more
5.3M posts
247.9K members
Join Community Grow Your Business

Community Staff

View All
J
CrazyS0b
scott_f
Top