| Topic Review (Newest First) |
| 11-04-2018 06:40 AM | |
| maddawg89 |
Few weeks ago now but I took the hpop from my parts 2003 and replaced the pump in the 96. It was original. 457,000 miles on it! Sent from my E6810 using Tapatalk |
| 09-16-2018 07:54 PM | |
| Raidersblog |
Replaced the driver's side fuel line today. Massive fuel leak has been fixed. Yesterday, I sold the old camper shell that came with the truck. For anyone new to doing this line like I was, watch the efuel conversion videos to get an idea. Remove the serpentine belt and ac compressor bolts x4 then remove the two more easily accessible bolts on the bracket that holds the ac compressor, the vaccum pump and the power steering pump. Then loosen the last bolt on the bracket, which is under the vaccum pump mount and rotate the bracket out of the way gently. Then remove the old hose, replace and put everything back together. I didn't use anything loctite or anything since the original didn't seem to have anything and they are compression fittings. I just got this truck, but clearly these lines should not be neglected. I lost 3/4 tank on my way home from work last week. |
| 08-27-2018 04:28 PM | |
| Todd Hickerson | i put my new 3" downpipe on. woke up this this this old motor up only has 357000 miles but till runnning strong. next on list is adiy air filter |
| 08-21-2018 09:39 AM | |
| Spud Monkey | That gives me an idea, I need one of these and then some in my truck, looks like it's more out of the way than a center console in a truck. Custom make myself one and line it up with accessory switches for winch, lights hydraulics and etc, be like jet liner overhead console. |
| 08-20-2018 04:11 PM | |
| STROKER09 | The 97 stroker is on coils ditched the leaf springs 110% better of a ride its a 2.5 coilover with a dual rate of 1400 lbs can't wait to airbag the rear and make this thing float good day for this old girl |
| 08-11-2018 06:22 PM | |
| dhurt | Put a new oil fill cap on her. Got tired of using channel locks to take the broke one off. |
| 08-08-2018 07:04 PM | |
| dhurt |
Quote:
Originally Posted by 1994fordf350
View Post
Installed a new south bend clutch as well as new bellowed up pipes.
Edit: Just read your other post and answered my question. |
| 08-08-2018 01:34 PM | |
| 1994fordf350 | Installed a new south bend clutch as well as new bellowed up pipes. |
| 08-05-2018 05:31 PM | |
| dhurt | Fixed the ATS to the overhead console. |
| 07-29-2018 05:42 PM | |
| dhurt | Finally installed my "O S**t" handles today after a few years of getting them. Coolant filter soon to come. |
| This thread has more than 10 replies. Click here to review the whole thread. | |
| Posting Rules | |