|Topic Review (Newest First)|
|12-31-2011 03:49 PM|
I got another factory(Motorcraft) one at my dealership. That's what the guys at PTP recommended. The triple shock setup has been working good for me. Started getting some death wobble, but the on set was so slow(over the last 8-10 months that I thought the shocks were going). Come to find out while I was replacing the shocks that the top factory mount was a little loose and also the center bolt on the right horizontal shock was loose. Everything's nice and tight again.
BTW Love the paint.
|12-31-2011 02:11 PM|
|12-31-2011 01:46 PM|
|XPLOSIV||Yes. Running duals from Fabtech and the factory one. Mine must have been pressed in by a f'in gorilla.|
|12-31-2011 09:01 AM|
|INJEKTER1||you take the nut off the bolt and hit the end of the bolt.....2.5 min... did you replace it with an aftermarket in the same location? and are you running any other aftermarket stabilizers? mounted off the axle and connected close to the drag link? i took off my factory and replaced with a dual set up.. just wondering if anyone has run duals and one at the factory mount at the same time....|
|12-30-2011 11:25 AM|
|12-30-2011 10:24 AM|
She finally gave it up after about 20 mins.
|12-29-2011 06:19 PM|
|Ryan RÝnning||I think I found a new sig quote!|
|12-29-2011 05:50 PM|
|12-29-2011 04:24 PM|
|XPLOSIV||Thanks. I'll give er a good wackin in the morning.|
|12-29-2011 03:23 PM|
|CT9AIX||Yep, had to beat mine like it stole something but eventually the little SOB gave up and came off. Grab a 2 or 3lb hammer and take some aggression out.|
|This thread has more than 10 replies. Click here to review the whole thread.|