| Topic Review (Newest First) |
| 06-18-2019 07:03 PM | |
| Jasonburrwc84 | Ended up being the speed sensor. Replaced it and all was fine. Thanks again. |
| 05-26-2019 11:25 AM | |
| Larry1013 | odds are it is the speed sensor. Hubs shouldn't matter on whose name is on the box. |
| 05-26-2019 11:04 AM | |
| Jasonburrwc84 | I replaced one side and reused the speed sensor. However, now I’m getting random abs/advance track warnings. Has anyone else experienced this? Could it be from not replacing the speed sensor? Could it be from having one wheel assemble factory and other MOG? Any thoughts? |
| 05-26-2019 11:01 AM | |
| Jasonburrwc84 |
Quote:
Originally Posted by nc1yocum
View Post
Ok, so I finally got it off and replaced. I bought 2 set of snap ring pliers that wouldn't fit inside, ended up buying a set of snap ring pliers from Harbor Freight to get that off. Then I couldn't get it to budge at all, even after all 4 nuts were removed. Someone on Facebook shared a video with me that shows how to use a socket extension and the power steering to get it to pop loose, worked like a champ. Then it took me a lot of swearing an patience to get the snap ring back on. I appreciate the help you guys gave.
|
| 03-11-2019 03:58 PM | |
| nc1yocum |
Quote:
Originally Posted by Chessiecam08*
View Post
NC1yocum, can you please share the video, I’m also on Facebook Stephen Shook
|
| 03-10-2019 07:01 PM | |
| Chessiecam08* | NC1yocum, can you please share the video, I’m also on Facebook Stephen Shook |
| 03-10-2019 01:59 PM | |
| nc1yocum | Ok, so I finally got it off and replaced. I bought 2 set of snap ring pliers that wouldn't fit inside, ended up buying a set of snap ring pliers from Harbor Freight to get that off. Then I couldn't get it to budge at all, even after all 4 nuts were removed. Someone on Facebook shared a video with me that shows how to use a socket extension and the power steering to get it to pop loose, worked like a champ. Then it took me a lot of swearing an patience to get the snap ring back on. I appreciate the help you guys gave. |
| 03-10-2019 01:50 PM | |
| Dave9228 | Also recommend getting a pick set because even with those pliers, it took about 45 minutes of me messing with it. Puting them back on was super easy, just taking them off sucked! |
| 03-10-2019 01:47 PM | |
| Dave9228 | I ended up breaking 2 snap ring pliers, one was a snap on set. I ended up ordering gearwrench 82033 double x external snap ring pliers off amazon. They are heavy duty, thin and worked for me and they were only 34 dollars. |
| 03-10-2019 01:44 PM | |
| ZMANN |
just the snap ring Knipex https://www.powerstroke.org/forum/ge...g-install.html |
| This thread has more than 10 replies. Click here to review the whole thread. | |
| Posting Rules | |