|Topic Review (Newest First)|
|09-03-2019 02:30 PM|
Originally Posted by Rolfsted View Post
|09-02-2019 07:45 AM|
|Rolfsted||I have a 15 also. It isn't capable to show the percentage of the DPF. I guess an older model can. On the screen with the compass if you scroll to the right is the percentage screen. Mine is blank. I can't do an operator regen either. I wish I could as I rarely get to do a complete regen. So I guess it does regens in stages. I read that with Forscan you can do forced regens parked in your driveway. I haven't had the time to figure that out though.|
|08-31-2019 05:13 PM|
|'16 KRLB City Slicker||
Originally Posted by twood71 View Post
|08-31-2019 09:34 AM|
|jman37||Depends how clogged it is to go right into regen when you first turn it on. When you start driving it will reach its % to start the cycle. A regen for my truck if it was 90% would take about 20 minutes of driving on the highway.|
|08-31-2019 09:09 AM|
Just hopping in on this thread so sorry if it is unrelated. I just picked up a new to me 16 XLT and had it for 2 days. I don't have the nice info screen in the gauges like you guys but I had a message flash saying exhaust cleaning taking place or something like that, right as I was getting home. I shut the truck off because we are about to go to the lake and will be on a roughly hour to hour and a half trip. That should be enough time for it to regen shouldn't it? Will it go into passive regen when we leave here shortly?
Thanks for the help.
|06-07-2019 10:07 PM|
The first time I regened the truck, it said the filter was clogged. After driving a blue screen came up saying the process was completed. I havenít seen it since but maybe thatís because the filter hasnít clogged again. I do have the lariat display screen as well.
Sent from my iPhone using Tapatalk
|06-07-2019 10:05 PM|
If you have the 4" info display between the gauges you can have a third screen turned on in the Information Section as I recall, that shows the % the filters is clogged and you can watch it clean as you drive.
There are a number of threads on this.
|06-06-2019 09:47 AM|
|jman37||No menu pops up to let you know it's complete. Whatever box you saw, wasn't for the regen completing.|
|06-06-2019 09:19 AM|
Same here - 2016.
Sounds normal to me. I have never gotten any message that says the cleaning cycle is complete.
The info the stock display gives is pretty minimal. I use an Edge cts2 monitor.
|06-06-2019 08:37 AM|
sounds like my 2015 6.7
Just a quick let me know it's doing it, but I already feel it in the throttle before the warning comes on. I also feel it in the throttle when it's done.
|This thread has more than 10 replies. Click here to review the whole thread.|