Hartwig Hartwig is offline
Compression Ignition Addict
- About Hartwig
- Out of North America
- Exact Location
- 76676 Graben-Neudorf, Germany
- 6.0 factory turbocharged
- Cab Configuration
- Crew Cab Long Box
- Dually 4X4
- self made camper cabin
- 1/8 Mile ET
- 1/8 Mile MPH
- 1/4 Mile ET
- 1/4 Mile MPH
- Total Albums: 1
- Total Pictures: 10
- Albums Created by Hartwig
- Last Activity: 07-03-2019 11:52 AM
- Join Date: 04-12-2016
- Referrals: 0
|01:58 PM - ZMANN mentioned Hartwig in post looking for low coolant sensor
Just kidding Hartwig good to see your ...
|05:59 AM - G8orFord mentioned Hartwig in post 6,0 cooling system pressure to high?
Nice Hartwig. We call your tur...
|03:31 PM - SparkyF250 mentioned Hartwig in post hello from GER
...-cts2-87100/ Yes Hartwig this is what I was t...
|06:27 AM - djmaguire mentioned Hartwig in post hello from GER
...elcome to the ORG, Hartwig. You have a big veh...
|03:09 AM - 6(siX)liter quoted Hartwig in post Head gaskets let go again.
why the pressure is high wit...
|10:22 PM - Hartwig quoted 6(siX)liter in post Head gaskets let go again.
I'll just share my experience. ...
|04:47 AM - Hartwig quoted Heavy_GD in post 2006 F350 horn switch issue
its a plastic "pad" that sits...
|05:11 AM - djmaguire quoted Hartwig in post better Themostat for the 6.0?
Most O-rings have a maximum ...
|08:38 PM - Hartwig quoted ChrisSki in post Which radiator for the 6,0?
I changed my OEM radiator to ...
|08:24 AM - Kryptic_361 quoted Hartwig in post well the 6.0 died.. again
take off the valve covers (w...
|07:15 PM - j.flow quoted Hartwig in post Which radiator for the 6,0?
Hello, is there a radiator w...
|02:22 PM - Hartwig quoted mpholland in post Edge EAS system sensors does not work
Might be some helpful info in ...
|08:36 PM - Hartwig quoted djmaguire in post Edge EAS system sensors does not work
Check this out: https://www...
|01:11 PM - Hartwig quoted ChrisSki in post Edge EAS system sensors does not work
Can't see your pics, but I th...
|11:09 AM - Hartwig quoted 323flint in post Bad Head gaskets ? or paranoid
Clr bath cleaner is the best ...
|06:26 AM - 323flint quoted Hartwig in post Bad Head gaskets ? or paranoid
the hose T on the degas bott...
|03:03 AM - Hartwig quoted Hydro in post Bad Head gaskets ? or paranoid
Couple of observations, wh...
|02:52 AM - Hartwig quoted iqraceworks in post Bad Head gaskets ? or paranoid
The degas cap vents at 16psi.......
|03:56 PM - iqraceworks quoted Hartwig in post Bad Head gaskets ? or paranoid
the engine overheated at the...
|12:19 PM - Hartwig quoted ZMANN in post looking for part designation
Hartwig thats not your tru...
|02:03 PM - JustinOOO9 quoted Hartwig in post running rough cold no DTCs
Is the problem on the oil si...
|01:41 AM - Hartwig quoted Hydro in post looking for IDS scantool
Could just use the starter...
|01:31 PM - djmaguire quoted Hartwig in post looking for IDS scantool
Thanks, but I can't find any...
|11:10 AM - ZMANN quoted Hartwig in post looking for low coolant sensor
the problem is, the ECT is ...
|iTrader Profile||Recent Ratings|