Ford Powerstroke Diesel Forum - View Profile: ChrisSki

ChrisSki ChrisSki is offline

Serving Our Country!

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. Smackdaddy53
    02-06-2019 01:00 AM - permalink
    Smackdaddy53
    I don’t have enough posts to post a link!
    https://www.leaderevaporator.com/p-4...y-fitting.aspx
  2. avsnips
    08-20-2015 12:27 PM - permalink
    avsnips
    Hello !

    I noted on your postings that you are running some of the same BPD upgrades I recently had done. I just got my '07 CC F350 6.0L CC DRW LWB 4x4 back from the shop after a complete BPD treatment. As I have no baseline to go from other than previous temperatures on a stock truck I was wondering if you could give me an idea what you are seeing in temps both for your ECT & EOT. Also, if you have done this additional sensor, what are you seeing for an EOT right at output of BPD oil cooler. I'm currently running an Edge Insight so all my readings are on OEM sensors @ original location.

    Any assistance you can provide would be appreciated. Thanks in advance for your help!

    Best regards,

    Dennis Nelson aka avsnips

  About Me

  • About ChrisSki
    State/Province
    Arizona
    Gender
    Male
    How did you find Powerstroke.org
    Internet Search
    Exact Location
    Phoenix, AZ
    Ride
    2005 F250 6.0
    Engine
    6.0 factory turbocharged
    Cab Configuration
    Crew Cab Short Box
    Drivetrain
    Single Rear Wheel 4X4
    Tranny type
    Other Auto
    Tires
    All Terrain
    Modifications
    Bullet Proof EGR, Bullet Proof Air Cooled oil Cooler, Edge CTS
    Horsepower
    0.0
    1/8 Mile ET
    0.000
    1/8 Mile MPH
    0.00
    1/4 Mile ET
    0.000
    1/4 Mile MPH
    0.00
  • Signature
    2005 F250, 189,000 Miles
    Bullet Proof HD Oil Cooler w/ Cold Weather Kit, Bullet Proof EGR, Bulletproof Water Pump, 7.3 Fan Clutch
    Airlift 5k Airbags and Wireless Air
    Edge CTS w/ EGT probe and Fuel Pressure Sensor.
    15 MPG slick; 10 MPG towing 11k fifth wheel
    Ravelco

    6.0 Flush Procedure: https://www.powerstroke.org/forum/att...flush_v1-0.pdf

    Good 6.0 Reading: www.powerstrokediesel.com/docs/EF_456.pdf

  Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 09:45 AM
  • Join Date: 10-18-2014
  • Referrals: 0

  Friends

Showing Friends 1 to 1 of 1
  • Got Dirt?
    • Got Dirt? is offline

  Mentions

05-10-2019
11:41 AM - djmaguire mentioned ChrisSki in post Sinister Diesel Exhaust Manifolds
...ription above from ChrisSki is a whole bunch of ...
05-04-2019
05:23 AM - Boudah mentioned ChrisSki in post 2005 diesel 6.0 Truck Whistles towing uphill
...normal. Thanks. ChrisSki I used to take PVC...
05-03-2019
08:23 AM - zsargent mentioned ChrisSki in post 2005 diesel 6.0 Truck Whistles towing uphill
ChrisSki, I hate to say this ...
04-28-2019
06:55 PM - Boudah mentioned ChrisSki in post 6.0 Chat Thread
ChrisSki, yeah... brought the...
03-30-2019
05:17 PM - jokester00 mentioned ChrisSki in post Coolant leak mystery.
Opps - Double Post
05:16 PM - jokester00 mentioned ChrisSki in post Coolant leak mystery.
Agree with ChrisSki - start digging! I k...
03-25-2019
05:02 PM - djmaguire mentioned ChrisSki in post Coolant flush
..._ Edited to add... ChrisSki 's fine post wasn't ...
03:01 PM - OleMissRbl mentioned ChrisSki in post Power Port / Inverter Mod (2005 F250 6.0)
ChrisSki I have only tried it...
01:58 PM - djmaguire mentioned ChrisSki in post Power Port / Inverter Mod (2005 F250 6.0)
Nice install! ChrisSki - not sure what the ...
03-21-2019
08:31 AM - jokester00 mentioned ChrisSki in post Turbo or ????
...atch the PIDS that ChrisSki mentioned. A wrenc...
03-05-2019
04:46 PM - Larry Grogan mentioned ChrisSki in post Sputter at warmup
I agree with ChrisSki, check your fuel pre...
03-02-2019
10:38 AM - Larry Grogan mentioned ChrisSki in post Another white smoke problem
... To validate what ChrisSki said, I had bad HG&#...
02-23-2019
08:30 PM - totalimpact mentioned ChrisSki in post f250 towability
...g a Mad turbo now. ChrisSki Gearhead hooked me u...
02-05-2019
05:07 AM - fedspunisher mentioned ChrisSki in post Oil Leak with no oil flow
...Ford Hydro 79jasper ChrisSki
01-29-2019
10:11 AM - djmaguire mentioned ChrisSki in post no start cold low ICP pressure
... be electrical, but ChrisSki 's suggestion about ...
01-28-2019
05:41 PM - Hydro mentioned ChrisSki in post no start cold low ICP pressure
...m the oil cooler as ChrisSki mentioned, there is ...
09:57 AM - Larry Grogan mentioned ChrisSki in post Got a clean 04 : how to drive it?
...g torque pro. As ChrisSki said you can get a s...
01-06-2019
08:23 PM - Hydro mentioned ChrisSki in post Oil leak
...this turns out, as ChrisSki mentioned
01-04-2019
07:49 AM - frey mentioned ChrisSki in post New Member, New Problems See Video
... Ficm? Hpop psi? ChrisSki - No lemon laws on a...
12-31-2018
05:26 AM - G8orFord mentioned ChrisSki in post What did you do to your 6.0 today?
ChrisSki you've probably solv...

  Quotes

05-22-2019
06:20 PM - F(Frankenstein)-250 quoted ChrisSki in post Reverse lamps relay issue
I can only recommend getting ...
07:58 AM - mjs2011 quoted ChrisSki in post First Post - 6.0 Crank Compression Test
You could loosen the belt by ...
05-21-2019
06:19 AM - ChrisSki quoted chwithad in post No oil pressure!
Yeah I'll try the snake cam t...
05-18-2019
02:43 PM - twood71 quoted ChrisSki in post Checking first if anyone solves this yet?
Because of my 51 gallon tank ...
05-15-2019
05:05 PM - Weberman3 quoted ChrisSki in post What did you do to your 6.0 today?
What's your plans for this? P...
02:43 PM - ChrisSki quoted Weberman3 in post What did you do to your 6.0 today?
Grabbed something from the jun...
05-13-2019
03:48 PM - joejack6.0 quoted ChrisSki in post Bed Plate Leak vs Lower Oil Level
Interesting theory, but my le...
05-11-2019
03:12 PM - Thomas Mesa quoted ChrisSki in post 05 F250 6.0 Powerstroke
That is exactly what I did an...
03:56 AM - ChrisSki quoted F350R in post High pitch whistle
I had a high pitch squeal ...
05-10-2019
08:41 PM - F350R quoted ChrisSki in post High pitch whistle
Maybe a hairline fracture or ...
05-09-2019
05:27 AM - wellcraft quoted ChrisSki in post Occasional no crank when key on
...roubleshoot. Hey ChrisSki, were you able to fi...
05-06-2019
09:21 AM - El_Rey_Dallas quoted ChrisSki in post What did you do to your 6.0 today?
Kind of curious if you're see...
07:29 AM - ChrisSki quoted El_Rey_Dallas in post What did you do to your 6.0 today?
Drove about 750 miles round trip t...
07:08 AM - ChrisSki quoted SparkyF250 in post Vacuum hose fix?
I think it's the vacuum leak th...
06:59 AM - SparkyF250 quoted ChrisSki in post Vacuum hose fix?
I actually thought the line h...
04:55 AM - G8orFord quoted ChrisSki in post 6.0 Cold Rough Idle with 8 new Injectors
I do feel lucky that I live i...
05-05-2019
07:23 PM - Techelard6.0 quoted ChrisSki in post 03 6.0 fuel leak
I'm having a problem with fue...
05:42 PM - ChrisSki quoted Colin7.3 in post What did you do to your 6.0 today?
I'm gonna have to go get some...
12:04 PM - ChrisSki quoted Colin7.3 in post What did you do to your 6.0 today?
I'm gonna have to go get some...
09:13 AM - ChrisSki quoted Boudah in post 2005 diesel 6.0 Truck Whistles towing uphill
You are plugging the inlet ...

  Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome