Ford Powerstroke Diesel Forum - View Profile: G8orFord

G8orFord G8orFord is online now

Premium Member

  Visitor Messages

Showing Visitor Messages 1 to 6 of 6
  1. Wareagle0817
    03-15-2019 08:24 AM - permalink
    Wareagle0817
    Hi, where were you able to pickup the '17 style mirrors you showed on a post? I have an '05 and am looking but not able to find. I looked on syppo's web site and they do not show the '17 mirrors. Thanks
  2. bscrochet
    03-05-2019 08:50 AM - permalink
    bscrochet
    Hi, I was reading an older thread about the Fumoto oil pan valve. I got to thinking if anyone has used this type of valve for the fuel/water separator on an 06 truck. It would sure make the process of draining water and changing the filter alot cleaner. Just a thought. Appreciate any input you would have.
  3. tmontane68
    01-23-2019 02:39 PM - permalink
    tmontane68
    Hey-I appreciate your input on this topic.

    I wanted to ask you directly what glitches you were having with the nGauge that only corrected with the updated firmware from eMotion?

    I just order the Ngauge mini with the 50HP tune and will install it Thursday. I didnt know if I needed to update the firmware prior to doing this or not.

    Thank you in advance.
  4. Chadmills
    03-04-2018 12:31 PM - permalink
    Chadmills
    Did you have to use new bolts for your flex plate,? Or flex plate adapter?..are they the throw away torque to yield bolts?.I'm still considering the dd camshaft, and there only 1 1/2 hour away from me..
  5. aug21_2002
    02-21-2018 04:31 AM - permalink
    aug21_2002
    G8orFord, your reply seems really good. i have a similar question for a no start. on a 06 6.0psd. situation, i changed the fuel filters 1000 miles ago. truck ran fine to work, went to lunch no start. these were my readings : code p2285, also when cranking IPR 77.7, IPC 290, FICM 48.8, SYNC 1. those were the reading on my Scangauge II. I'm pretty sure that is the screen on the IPR or the IPR has gone bad. ford wants 1500 buck , I'm like hell now i can do that Sh!t myself. What do you think about my diagnosis? i also checked oil pressure and it is good to go, so i know that atlas the LPOP is pumping enough to make The HPOP work. only mod to truck are Intake, exhaust, oil and coolant bypass filtration. still has OEM injectors. thanks again for your assistance.
    Very Respectfully
    TDM
  6. michaelaiman
    09-14-2015 07:07 AM - permalink
    michaelaiman
    Forgot to mention... I was thinkin either 2" PVC cap clamped in to the boot at the elbow or a 2" fernco cap clamped directly onto the charge air pipe... I havnt checked the sizing, but it might be pretty darn close

  About Me

  • About G8orFord
    State/Province
    Florida
    Gender
    Male
    How did you find Powerstroke.org
    google
    Exact Location
    Northwest, FL
    Occupation
    Land Surveyor
    Ride
    2017 F-250 CCSB
    Engine
    Other
    Cab Configuration
    Crew Cab Short Box
    Drivetrain
    Single Rear Wheel 4X4
    Tranny type
    Torqshift
    Tires
    All Terrain
    Horsepower
    0.0
    1/8 Mile ET
    0.000
    1/8 Mile MPH
    0.00
    1/4 Mile ET
    0.000
    1/4 Mile MPH
    0.00
  • Signature
    Dexter
    2017 F-250 Lariat CCSB FX4 SRW- A few Forscan tweaks
    My old Truck, now son's truck:
    2004 F-250SD Lariat CCSB FX4 SRW; SCT X4 w/custom tunes (currently TSD SPD)
    FICMRepair FICM; PHP FICM Tuner (currently Atlas40); KC Turbos Stage 1.5 Turbo;
    CNCFab Stage 1 HPOP; BPD VK688 Oil Cooler Relocate with coolant re-route; BPD Water Pump;
    Kill Devil Diesel O-ringed Heads; ARP Studs; Fel-Pro Gaskets; IPR Coolant Filter;
    DashCommand on PLX Kiwi2 + iMFD with EGT & Fuel/Oil Pressure

  Statistics

Total Posts
Visitor Messages
Total Thanks
General Information

  Friends

Showing Friends 1 to 7 of 7

  Garage

    2004 Ford F-250
    The big truck

  Mentions

04-17-2019
10:07 AM - G8orFord mentioned peixinho in post Recommended tuning for manual transmission truck
...l address above. peixinho amiright?
04-12-2019
05:47 AM - G8orFord mentioned jokester00 in post Need help with boost
... not. Also, like jokester00 said, you will not b...
04-07-2019
05:55 PM - G8orFord mentioned [email protected] in post Trans fitting for Performance Radiator-Help
...e helping you out. [email protected] amiright? FWIW, I...
05:41 PM - G8orFord mentioned Hydro in post 2005 with 40,000 Miles - Lost Power and Died
... OP should do what Hydro says. Everyone shou...
05:41 PM - G8orFord mentioned djmaguire in post 2005 with 40,000 Miles - Lost Power and Died
...a better man than I djmaguire. DJ... DJ... you a...
04-05-2019
07:20 AM - G8orFord mentioned HP MACHINE in post Sluggish cruise control
...RL acting much like HP MACHINE described too. On o...
04-04-2019
04:51 PM - G8orFord mentioned BridgerMT in post 6.7L Chat Thread
WTH BridgerMT? Where you been? Y...
04-03-2019
05:40 PM - G8orFord mentioned voodooridr in post Sluggish cruise control
...problems are '05+. voodooridr did they change anyt...
04:11 PM - G8orFord mentioned Jet in post 2017 F350 towing
Jetjock is right. Stop ...
04-02-2019
07:57 AM - G8orFord mentioned F250_SUPER_4x4 in post Anyone use the new Delo 400 XSP 5w-40 (CK-4) oil in their 6.0?
...r Delo offering. F250_SUPER_4x4 is one of the guys w...
03-26-2019
01:12 PM - djmaguire mentioned G8orFord in post Brand new motor, first fire, fill coolant then coolant everywhere! Help!
...Russians? ...and G8orFord knows his stuff. I ...
05:43 AM - G8orFord mentioned [email protected] in post 6.4 starter?
...arter, get one from [email protected] https://cncfab.us/...
03-25-2019
05:45 PM - G8orFord mentioned djmaguire in post Coolant flush
... You're good. Like djmaguire said, I'm a little s...
04:10 PM - G8orFord mentioned djmaguire in post Can anyone identify this leak?
djmaguire explain to them abou...
03-24-2019
05:57 AM - G8orFord mentioned fordsvtparts in post P012F code service wrench showing
fordsvtparts fix your web page. T...
03-20-2019
05:51 PM - Hydro mentioned G8orFord in post Probably beating a dead horse.
...to death. Thanks G8orFord ,I missed the Excurs...
08:40 AM - G8orFord mentioned voodooridr in post Left Rear L/R ABS Sensor
voodooridr is correct that ther...
03-14-2019
05:17 AM - G8orFord mentioned LoxDiesel in post Who makes the lifters?
...ont cover. Maybe LoxDiesel, toren302, kaya or ...
05:17 AM - G8orFord mentioned toren302 in post Who makes the lifters?
... Maybe LoxDiesel, toren302, kaya or Hydro can c...
05:17 AM - G8orFord mentioned Hydro in post Who makes the lifters?
... toren302, kaya or Hydro can confirm or inval...

  Quotes

04-21-2019
06:53 PM - joe blow quoted G8orFord in post Pointers on Head gasket job
Add to that stealing product ...
04-16-2019
03:36 PM - kcoyner quoted G8orFord in post 6.0 Engine Swap
I should have qualified the s...
04-15-2019
06:07 PM - kcoyner quoted G8orFord in post What's it called?
"Shield" https://parts.auton...
04:48 PM - G8orFord quoted BrewScrew in post F-450 STX headlight question
Morimoto XB these totally chan...
09:04 AM - 027.3 quoted G8orFord in post Blown intercooler??
Split cold side plastic pipe....
09:02 AM - Got Dirt? quoted G8orFord in post Blown intercooler??
Drink another cup of coffee a...
07:54 AM - john galt quoted G8orFord in post Blown intercooler??
Split cold side plastic pipe....
04-14-2019
08:54 PM - fetorino quoted G8orFord in post Replacing 13v with 10v turbo wheel
If your turbo is in otherwise...
07:24 PM - fetorino quoted G8orFord in post FICM Tune ICP IPR readings.
If you have an early '04 tru...
04-13-2019
06:00 PM - voodooridr quoted G8orFord in post What did you BUY FOR your 6.0 today?
Ok, but don't say I didn't w...
05:56 PM - G8orFord quoted voodooridr in post What did you BUY FOR your 6.0 today?
That oil sender is relatively b...
06:34 AM - voodooridr quoted G8orFord in post What did you BUY FOR your 6.0 today?
I'd spring for a new oil pres...
04:59 AM - G8orFord quoted voodooridr in post What did you BUY FOR your 6.0 today?
Nothing, I can't afford anythi...
04-12-2019
10:02 AM - Joets185 quoted G8orFord in post Door Chime Issues
I doubt he's still listening ...
09:33 AM - G8orFord quoted Joets185 in post Door Chime Issues
There is a small switch that ...
06:07 AM - fedspunisher quoted G8orFord in post Need help with boost
MAP = Manifold Absolute Press...
04-11-2019
05:55 PM - Flamed99 quoted G8orFord in post What did you do to your 6.0 today?
So fix it. https://www.eba...
05:50 PM - G8orFord quoted voodooridr in post What did you do to your 6.0 today?
Watched them rip the cab off th...
05:48 PM - G8orFord quoted Flamed99 in post What did you do to your 6.0 today?
I'm jealous you have a later ...
09:37 AM - SparkyF250 quoted G8orFord in post tstat or sensor
Yes. Because of that, I woul...

  Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
1
100.0%
Members who left positive:
Members who left negative:
1
0
Total positive feedback: 1
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome