Ford Powerstroke Diesel Forum - View Profile: sbluke55


sbluke55 sbluke55 is offline

Compression Ignition Addict

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. Billy231
    02-15-2016 08:33 AM - permalink
    Billy231
    Hello, sorry to bother you here but being you mentioned a few things regarding my truck last week I had a few questions that maybe you can shed some light on for me. I have the 99 F250 with low miles with the plow on it.
    A friend of mine has a brand new set of wheels and tires off his 2013 F350 with the Michelin 275/70/18, I know they'd be a sweet upgrade for me 1999 with 16's. You did mention I'll need the 2" spacer kit. Would that be needed on all 4 wheels? If so can you recommend a kit or place that sells them?
    I looked on eBay and see them there but as you know, you get what you pay for there and I don't wanna end up with ****.

    My local truck shop told me I was only able to buy the leveling kit for my truck that only comes as a kit for front and rear ($425) plus labor etc.. Yet I may not need them for the tires I'll be putting on but I'd still like to level it off.
    Any help would be appreciated in sending me any info or places to order from.
    Thanks Billy.
  2. Grampa's money pit
    12-15-2015 07:36 PM - permalink
    Grampa's money pit
    Thank you for your reply. My truck is nowhere near as fancy/built up as your truck. I am starting out with A new long block, upgraded with head studs, forged rods, stellite valves. Rebuilt injectors/turbo. 3" down from the turbo to 4" the rest of the way out. Have a power adder from a local diesel shop that has built up alot of 7.3 powerstrokes. Have A nice day.

  About Me

  • About sbluke55
    State/Province
    Colorado
    Gender
    Male
    Exact Location
    Grand Junction, CO
    Ride
    01 F250
    Engine
    7.3 DI factory turbocharged
    Cab Configuration
    Crew Cab Short Box
    Drivetrain
    Single Rear Wheel 4X4
    Tranny type
    6 Speed Manual
    Tires
    Mudders
    Primary Vehicle Use
    hunting and fun
    Horsepower
    0.0
    1/8 Mile ET
    0.000
    1/8 Mile MPH
    0.00
    1/4 Mile ET
    0.000
    1/4 Mile MPH
    0.00
  • Signature
    01 f-250, Standard
    Rev tech 4" lift,37" military wrangler Mt tires
    KC diy 66, Full force 160/100 and custom tunes from PHP
    Banks inner cooler and full 4" exhaust, Diy S&B intake
    Diy quad feed, Hydra, Isspro boost, pyro, and fuel pressure
    3/0 battery cables with military style terminals

  Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Yesterday 06:44 PM
  • Join Date: 09-25-2013
  • Referrals: 0

  Friends

Showing Friends 1 to 1 of 1
  • rsater1
    • rsater1
    • Compression Ignition Addict
    • rsater1 is offline

  Garage

    2001 Ford F250
    ol' blue

  Mentions

08-06-2017
07:09 PM - sbluke55 mentioned [email protected] in post What did you do to your 7.3 Today?
...n what comes with [email protected] 4 line competition k...
08-01-2017
08:35 AM - Heavy_GD mentioned sbluke55 in post Need new image hosting app
...[img ] vs [url ] sbluke55
07-31-2017
06:40 AM - sbluke55 mentioned fordsvtparts in post Clutch fork
...d to 81520 Thanks. fordsvtparts
07-30-2017
05:15 PM - sbluke55 mentioned [email protected] in post What did you do to your 7.3 Today?
... buy a new one from [email protected] https://uploads.tap...
05:13 PM - sbluke55 mentioned forthehalibut in post CSP chat thread
...r. Idm side. Help forthehalibut this weekend do the ...
07-26-2017
08:12 PM - sbluke55 mentioned forthehalibut in post What did you do to your 7.3 Today?
...ht pull it out when forthehalibut comes down for a qui...
07-15-2017
08:18 AM - sbluke55 mentioned Chatham036 in post hydra issues, advice or technician recommendations
...n't fry your hydra. Chatham036
08:13 AM - sbluke55 mentioned Cha in post hydra issues, advice or technician recommendations
...n't fry your hydra. Chatham036
07-10-2017
11:14 AM - sbluke55 mentioned ZMANN in post PhotoBucket change of policy
Zmann must be bored. I pos...
06-30-2017
10:20 PM - SparkyF250 mentioned sbluke55 in post June 17 ROTM poll
...G8orFord :thumb: sbluke55 tried to cheat with ...
06-28-2017
06:55 AM - sbluke55 mentioned Heavy_GD in post Factory turbo upgrades?
...internet fight with Heavy_GD
06-22-2017
07:04 AM - sbluke55 mentioned ZMANN in post New to site not to powerstrokes.
Hahaha. ZMANN is it 15 posts tell ...
07:04 AM - sbluke55 mentioned masakimm in post New to site not to powerstrokes.
...n post links? Is so masakimm you might have to lo...
06-19-2017
05:34 AM - sbluke55 mentioned [email protected] in post Ford 7.3L Powerstroke Oil Leak: Turbo Pedestal Seal Replacement
... a delete pedestal. [email protected] can hook you up.
06-16-2017
06:39 PM - AzPatMan mentioned sbluke55 in post CSP chat thread
sbluke55 Well, looks like I ...
08:34 AM - sbluke55 mentioned layson in post '06 F250 SD with 14" Lift, Drives Horribly
layson might know too. I ...
06-15-2017
09:09 AM - sbluke55 mentioned [email protected] in post Cheap intakes
[email protected] can you help him out...
06-02-2017
07:13 PM - Rattlesnake18 mentioned sbluke55 in post June 17 ROTM poll
...arning to spell, or sbluke55 is.:look:
06-01-2017
06:33 AM - Heavy_GD mentioned sbluke55 in post June 17 ROTM poll
...72341948_HDR.jpg sbluke55 http://i1294.phot...
05-31-2017
06:24 AM - sbluke55 mentioned [email protected] in post TS 6 Position Chip Questions
Buy your chip from [email protected] He has ts6 chips wi...

  Quotes

08-28-2018
09:52 PM - repalmer quoted sbluke55 in post Camera Roll Game
https://uploads.tapatalk-cdn....
09:04 PM - DieselDC quoted sbluke55 in post Camera Roll Game
https://uploads.tapatalk-cdn....
08-27-2018
06:50 AM - sbluke55 quoted hansel in post What did you do to your 7.3 Today?
Never got to my up pipes th...
06:50 AM - sbluke55 quoted Krel in post What did you do to your 7.3 Today?
Never got to my up pipes ...
08-21-2018
02:08 PM - SparkyF250 quoted sbluke55 in post Political Chat
After hearing it on rush this...
01:20 PM - john galt quoted sbluke55 in post Political Chat
I just found this out today. ...
01:18 PM - SparkyF250 quoted sbluke55 in post Political Chat
I just found this out today. ...
01:08 PM - sbluke55 quoted Bri_Man57 in post What did you do to your 7.3 Today?
Intersting, I'm contemplating ...
01:05 PM - Bri_Man57 quoted sbluke55 in post What did you do to your 7.3 Today?
I left mine on. It looks kind...
12:40 PM - Bri_Man57 quoted sbluke55 in post What did you do to your 7.3 Today?
Interesting! Did only certai...
08-20-2018
03:13 PM - sbluke55 quoted forthehalibut in post What did you do to your 7.3 Today?
Got my S&B filter oiled today and ...
03:13 PM - sbluke55 quoted e99stroker+ in post What did you do to your 7.3 Today?
Got my S&B filter oiled today an...
08-16-2018
05:57 PM - sbluke55 quoted Krel in post What did you do to your 7.3 Today?
So only replace the wheel...
12:20 PM - Krel quoted sbluke55 in post What did you do to your 7.3 Today?
Personally I would skip the c...
08-14-2018
06:15 PM - Bri_Man57 quoted sbluke55 in post Looking to get less lift, best route?
Looks good. Thank you! Re...
01:30 PM - my5sons quoted sbluke55 in post Parker, CO F250 Suspension Mechanic?
...r tires. Thanks sbluke55, I notice when I run...
10:52 AM - my5sons quoted sbluke55 in post Parker, CO F250 Suspension Mechanic?
Can you post up a pic of the ...
08-13-2018
03:51 PM - my5sons quoted sbluke55 in post Parker, CO F250 Suspension Mechanic?
Rattlesnake18 do you know any...
08-11-2018
06:12 AM - sbluke55 quoted Jwillif12 in post Spun connecting rod bearing in 2012 6.7 diesel at 105,000 miles no help from Ford Cor
Sbluke55, Trust me, the forget...
08-01-2018
06:03 AM - sd2ca quoted sbluke55 in post What did you do to your 7.3 Today?
Do you have low battery volta...

  Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
1
100.0%
Members who left positive:
Members who left negative:
1
0
Total positive feedback: 1
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome