Overhead display fix
My overhead display didn't work at the time of purchase so I used this thread to try a fix
After pulling it out I noticed that there was a chip loose. I pulled out the soldering iron and attempted to reattach the chip. Unfortunately my fat fingers and crappy dollar store iron didn't work so I Googled a local computer repair guy (live in Mission about 5 mins from my house).
For only $20 he reattached the chip and also removed, cleaned and re-soldered all the others on the board. (in only an hour)
Great guy, great service, good to have the unit working again.
|All times are GMT -8. The time now is 07:18 PM.|
Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.