DRW Marker mod on SRW 19
Here’s my finished product https://uploads.tapatalk-cdn.com/201...7242c26310.jpg
Pulled the stock panel, measured Center then drilled 1/8 pilot holes. Then got out the step bit and went up to 3/4 and I was good to go. I drilled ‘high’ off center, as a portion of the stock panel is tucked behind the top of the bumper. Here’s that shot https://uploads.tapatalk-cdn.com/201...e410828e91.jpg
The lights came from etrailer. Verified Black is pos and white is ground. I wired the + to the middle wire on the lower taillight bulb, as all I was after was to have em on when the headlights are on. I made a grounding point on the frame for this and future lighting needs.
Sent from my iPhone using Tapatalk
From one Ruby Red owner to another...Awesome mod!
|All times are GMT -8. The time now is 04:27 AM.|
Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.